Jaime Tiampo wrote:
>> Some interesting ideas! For the wing-ring (!) I'd be more inclined to look 
>> for a piece of plastic piping of a suitable diameter and wall thickness that 
>> you could cut a thin slice from, so that the curve is already accurately 
>> formed. I'm sure there are some types of rigid pipe for plumbing use that 
>> are made in ABS or a similar glueable plastic?
>>     
> I had the same thought before I started but I couldn't find anything that was 
> only 1mm thickish.
>
> The diameter is about 2" and I think for the right look it should be 1-2mm 
> thick. Might be able to use a slice out of a small yogurt container. I'll 
> double check with one of mine.
>   
You could try something like model rocket tubing. I know at least one 
manufacturer makes what it describes as "2.1" diameter tube", though 
they tend to quote internal diameter rather than external; the ID is 54 
mm, BTW. It might be a little large for your purposes, and you do have 
to buy it in 3-foot lengths... How many of those are you planning to 
make? :-D 

Might be worth a try. I have plans to get some nominally 1.1" tube as 
the basis for a mini of INSS /Lenin/, but I have to find or work out 
something to use on the ends... :-\

Phil

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Ground Zero Games" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/gzg-group?hl=en
-~----------~----~----~----~------~----~------~--~---

_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l

Reply via email to