Hi did you know this one http://www.exceliance.fr/sites/default/files/biblio/appnotes_0061_lync_2010_deployment_guide_en.pdf
cheers Thomas Heil Am 28.08.2013 um 21:29 schrieb Ozgur Tas <o...@morrisonhershfield.com>: > We are just using to load balance a Front-End pool in Lync 2010. > > Each local Lync branch servers have one failover pool assigned, which is the > load balanced pool at datacenter (2 servers at datacenter). And these two > front end servers is load-balanced using haproxy ( ports 80, 443, 8080, 4443 > ). > > ~~~some info: > The following settings should be configured on your hardware load balancer to > properly load balance requests for Lync Web Services: > •For internal Web Services virtual IPs (VIPs), set source_addr persistence > (internal port 80, 443) on the hardware load balancer. For Lync Server 2010, > source_addr persistence indicates that multiple connections coming from a > single IP address are always sent to one server to maintain session state. > •For external Web Services virtual IPs (VIPs), set cookie-based persistence > on a per port basis for external ports 4443, 8080 on the hardware load > balancer. For Lync Server 2010, cookie-based persistence indicates that > multiple connections from a single client are always sent to one server to > maintain session state. To configure cookie-based persistence, the load > balancer must decrypt and re-encrypt SSL traffic. Therefore, any certificate > assigned to the external web service FQDN must also be assigned the 4443 VIP > of the hard load balancer. > ◦Cookies must not be set to HTTP only. > ◦Cookies must not be configured with an expiration time. > ◦Cookies must be configured to filter on ‘MS WSMAN’. > ◦Cookies must be set in every HTTP response for which the incoming HTTP > request did not have a cookie, regardless of whether a previous HTTP response > on that same TCP connection had already obtained a cookie. If the Load > Balancer optimizes cookie insert to only occur once per TCP connection, that > optimization MUST NOT be used. > •If a reverse proxy is used, set the Forward host header to True in the > reverse proxy publishing rule for port 4443. This will ensure that the > original URL is forwarded to the target web server. > ~~~ > : > http://blogs.technet.com/b/nexthop/archive/2011/11/03/hardware-load-balancer-requirements-for-lync-server-2010.aspx > > -----Original Message----- > From: Lukas Tribus [mailto:luky...@hotmail.com] > Sent: Wednesday, August 28, 2013 1:41 PM > To: Kevin C > Cc: haproxy@formilux.org > Subject: RE: Load Balance individual requests > >> Yes, link use SIP and HTTPS. > > HAProxy can't load balance UDP based SIP. > > > >> The documentation says tha HAproxy must load balance individual >> requests within a TCP session and make persistence with a cookie. > > This implies however that HAProxy has to offload SSL. So the certificate > needs to be installed on the HAProxy box. > > > Lukas