Hi. On Sat, 28 May 2022 11:42:17 +0000 Ajay Mahto <ajay.ma...@npci.org.in> wrote:
> Unsubscribe me. Feel free to do it by your self. https://www.haproxy.org/#tact Regards Alex > Regards, > > Ajay Kumar Mahto, > Lead DevOps Engineer, > NPCI, Hyderabad > +91 8987510264 > ________________________________ > From: Willy Tarreau <w...@1wt.eu> > Sent: Friday, May 27, 2022 11:55:07 PM > To: haproxy@formilux.org <haproxy@formilux.org> > Subject: [ANNOUNCE] haproxy-2.6-dev12 > > WARNING: This mail has come from outside. Please verify sender, attachment > and URLs before clicking on them. > > Hi, > > HAProxy 2.6-dev12 was released on 2022/05/27. It added 149 new commits > after version 2.6-dev11. > > Yeah I know, I said we'll only issue -dev12 if we face some trouble. But > stay cool, we didn't face any trouble. However we figured that it would > help last-minute testers to have a final tagged version. > > The vast majority of patches are tagged CLEANUP and MINOR. That's great. > > One old github issue was finally addressed, regarding the HTTP version > validation. In the past we used to accept any 4-letter protocol using > letters H,P,R,S,T, which allowed us to match both HTTP and RTSP. But it > was reported to cause trouble because it was neither possible to disable > RTSP support not extend this to other protocols. The problem with having > RTSP enabled by default is that if haproxy forwards it to a backend server > that doesn't know it, the server may respond with an HTTP/0.9 error that > will be blocked by haproxy which then returns a 502 error. That's no big > deal until you're watching your load balancer's logs and counters. > > So now by default only HTTP is accepted, and this can be relaxed by > adding "accept-invalid-http-request". To be honest, I really doubt that > there are that many people using RTSP, given that we never ever get any > single problem report about it, so I think it will not be a big deal to > add this option in such cases so that all other users gain in serenity. > This will likely be backported but if so, very slowly as this will be a > behavior change, albeit a very small one. > > Some polishing was done on QUIC, to improve the behavior on closing > connections and stopping the process, and error processing in general. > The maintainability was also improved by refactoring certain areas. > Ah, crap, I just noticed that we missed a few patches from Fred who > added some doc and a few settings! > > The conn_streams that were holding up the release are now gone. It took > two of us two full days of code analysis and head scratching to figure > the role of certain antique flags and give them a more appropriate name, > but that was really necessary. I must admit I really like the new model > in 2.6, it's much more consistent and logical than 2.5 and older. It's > visible in that it's easier to document and explain. And even during the > changes it was easier to figure the field names for parts that had to be > changed manually. > > There are a bit more patches than I initially expected because this time > I refused to leave poorly named function arguments and local variables: > we've suffered from this for many years where process_stream() used to > have a "struct stream *sess" and the session was "sess->sess". I didn't > want to experience this anymore, we need the code to be more intuitive > and readable especially for new contributors, and given the large amount > of changes since 2.5 that will complicate backports anyway, it was the > perfect opportunity to pursue that quest. While these changes represent > many patches, they're essentially renames. There's always the tiny risk > of an undetected mistake but all of them are trivial, were reviewed > multiple times, built and individually tested so I'm not worried (famous > last words :-)). > > Some of us will continue testing over the week-end (it's already deployed > on haproxy.org). I think we'll add a few bits of doc, Fred's patches that > we missed, maybe a fix or two for last minute issues, and I expect to > release on Tuesday (because Mondays are usually too short). > > Please find the usual URLs below : > Site index : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.haproxy.org%2F&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=re5z5mdHaKq8gU73DlWwiMCCEYz4E9nnQzamqFlgUeo%3D&reserved=0 > Documentation : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdocs.haproxy.org%2F&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=PHJsvY2xbGuNCep7m8SKF5ZJ30p67d3vzZIznjxgVoI%3D&reserved=0 > Wiki : > https://ind01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fhaproxy%2Fwiki%2Fwiki&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=jUw9YeBv6Hnmp%2BO%2FcbAvFBh9wr4Qd%2BCDkFxGTAdKkRU%3D&reserved=0 > Discourse : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdiscourse.haproxy.org%2F&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=qTn4oXrfVyKX5oSoGzffQ9zxa7Dhn1ok6z7qs1UYEIM%3D&reserved=0 > Slack channel : > https://ind01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslack.haproxy.org%2F&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Yip5oeWm2yBfWRjZN7UM5LY7Z6OzmXXNiGTVp1ZJyns%3D&reserved=0 > Issue tracker : > https://ind01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fhaproxy%2Fhaproxy%2Fissues&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=kfKPU3k9hhHu9NAcp%2FNm1qxDRgMQfOKgqISYeR0lxDI%3D&reserved=0 > Sources : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.haproxy.org%2Fdownload%2F2.6%2Fsrc%2F&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=E%2FclhOIB8mE3oAW6IDtbBBhXAasBLwkJ0fU46rI0brE%3D&reserved=0 > Git repository : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgit.haproxy.org%2Fgit%2Fhaproxy.git%2F&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=1XhfIZZL19MbJHHULHgXYiD6JEPnZjIJHgofG7VXv3s%3D&reserved=0 > Git Web browsing : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgit.haproxy.org%2F%3Fp%3Dhaproxy.git&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=FSMxcg93nk%2F71q%2FScyUY1zgic33ZOia3UrvtUAq0528%3D&reserved=0 > Changelog : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.haproxy.org%2Fdownload%2F2.6%2Fsrc%2FCHANGELOG&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=DMsaJicrOs1xRFR%2BhbgMOKsua1R34N4inAWTutFnT5M%3D&reserved=0 > Pending bugs : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.haproxy.org%2Fl%2Fpending-bugs&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=tUqx7%2Bv2bj%2FQNssbHwnTEavr3ISN%2FI%2B%2F4xfpsrp1BEo%3D&reserved=0 > Reviewed bugs : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.haproxy.org%2Fl%2Freviewed-bugs&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=w6g1XTIale885ktxut0FA6heAkhgx9lHMlnD34%2FSITQ%3D&reserved=0 > Code reports : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.haproxy.org%2Fl%2Fcode-reports&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=pr9nAGTUeKxN03FEdZNKOmSHp00adcDu4yUPknUY%2BHE%3D&reserved=0 > Latest builds : > https://ind01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.haproxy.org%2Fl%2Fdev-packages&data=05%7C01%7Cajay.mahto%40npci.org.in%7C9d4ba987a73844dbbef808da400e7c5a%7C8ca9216b1bdf40569775f5e402a48d32%7C0%7C0%7C637892728218046385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=2GLE5sU1vJL23GO3klXrC0%2F6Muog8t1O54bhJFBoS%2F4%3D&reserved=0 > > Willy > --- > Complete changelog : > Amaury Denoyelle (26): > BUG/MEDIUM: mux-quic: adjust buggy proxy closing support > Revert "MINOR: quic: activate QUIC traces at compilation" > Revert "MINOR: mux-quic: activate qmux traces on stdout via macro" > MINOR: h3: mark ncbuf as const on h3_b_dup > MINOR: mux-quic: do not alloc quic_stream_desc for uni remote stream > MINOR: mux-quic: delay cs_endpoint allocation > MINOR: mux-quic: add traces in qc_recv() > MINOR: mux-quic: adjust return value of decode_qcs > CLEANUP: h3: rename struct h3 -> h3c > CLEANUP: h3: rename uni stream type constants > BUG/MINOR: h3: prevent overflow when parsing SETTINGS > MINOR: h3: refactor h3_control_send() > MINOR: quic: support CONNECTION_CLOSE_APP emission > MINOR: mux-quic: disable read on CONNECTION_CLOSE emission > MINOR: h3: reject too big frames > MINOR: mux-quic: emit STREAM_STATE_ERROR in qcc_recv > BUG/MINOR: mux-quic: refactor uni streams TX/send H3 SETTINGS > MINOR: h3/qpack: use qcs as type in decode callbacks > MINOR: h3: define stream type > MINOR: h3: refactor uni streams initialization > MINOR: h3: check if frame is valid for stream type > MINOR: h3: define non-h3 generic parsing function > MEDIUM: quic: refactor uni streams RX > CLEANUP: h3: remove h3 uni tasklet > MINOR: h3: abort read on unknown uni stream > MINOR: h3: refactor SETTINGS parsing/error reporting > > Christopher Faulet (3): > BUG/MEDIUM: resolvers: Don't defer resolutions release in deinit > function BUG/MINOR: task: Don't defer tasks release when HAProxy is stopping > Revert "BUG/MINOR: task: Don't defer tasks release when HAProxy is > stopping" > > Emeric Brun (2): > BUG/MEDIUM: peers: fix segfault using multiple bind on peers sections > BUG/MEDIUM: peers: prevent unitialized multiple listeners on peers > section > > Thayne McCombs (1): > BUG/MEDIUM: sample: Fix adjusting size in word converter > > Tim Duesterhus (5): > CLEANUP: tools: Clean up non-QUIC error message handling in > str2sa_range() BUG/MEDIUM: tools: Fix `inet_ntop` usage in sa2str > CLEANUP: tools: Crash if inet_ntop fails due to ENOSPC in sa2str > BUG/MEDIUM: http: Properly reject non-HTTP/1.x protocols > REGTESTS: Do not use REQUIRE_VERSION for HAProxy 2.5+ (2) > > William Lallemand (2): > DOC: configuration: add a warning for @system-ca on bind > BUG/MINOR: ssl/lua: use correctly cert_ext in CertCache.set() > > Willy Tarreau (110): > CLEANUP: init: address a coverity warning about possible multiply > overflow MEDIUM: h1: enlarge the scope of accepted version chars with > accept-invalid-http-request CLEANUP: init: address another coverity warning > about a possible multiply overflow CLEANUP: conn_stream: remove unneeded > exclusion of RX_WAIT_EP from RXBLK_ANY CLEANUP: conn_stream: rename the > cs_endpoint's context to "conn" MINOR: conn_stream: add new sets of functions > to set/get endpoint flags DEV: coccinelle: add cs_endp_flags.cocci > CLEANUP: conn_stream: apply cs_endp_flags.cocci tree-wide > DEV: coccinelle: add endp_flags.cocci > CLEANUP: conn_stream: apply endp_flags.cocci tree-wide > CLEANUP: conn_stream: rename the stream endpoint flags CS_EP_* to > SE_FL_* CLEANUP: conn_stream: rename the cs_endpoint's target to "se" > CLEANUP: conn_stream: rename cs_endpoint to sedesc (stream endpoint > descriptor) CLEANUP: applet: rename the sedesc pointer from "endp" to "sedesc" > CLEANUP: conn_stream: rename the conn_stream's endp to sedesc > CLEANUP: conn_stream: rename cs_app_* to sc_app_* > CLEANUP: conn_stream: tree-wide rename to stconn (stream connector) > CLEANUP: mux-h1: add and use h1s_sc() to retrieve the stream connector > CLEANUP: mux-h2: add and use h2s_sc() to retrieve the stream connector > CLEANUP: mux-fcgi: add and use fcgi_strm_sc() to retrieve the stream > connector CLEANUP: mux-pt: add and use pt_sc() to retrieve the stream > connector CLEANUP: stdesc: rename the stream connector ->cs field to ->sc > CLEANUP: stream: rename "csf" and "csb" to "scf" and "scb" > CLEANUP: stconn: tree-wide rename stream connector flags CS_FL_* to > SC_FL_* CLEANUP: stconn: tree-wide rename stconn states CS_ST/SB_* to > SC_ST/SB_* MINOR: check: export wake_srv_chk() > MINOR: conn_stream: test the various ops functions before calling them > MEDIUM: stconn: merge the app_ops and the data_cb fields > MINOR: applet: add new wrappers to put chk/blk/str/chr to channel from > appctx CLEANUP: applet: use applet_put*() everywhere possible > CLEANUP: stconn: rename cs_{i,o}{b,c} to sc_{i,o}{b,c} > CLEANUP: stconn: rename cs_{check,strm,strm_task} to sc_strm_* > CLEANUP: stconn: rename cs_conn() to sc_conn() > CLEANUP: stconn: rename cs_mux() to sc_mux_strm() > CLEANUP: stconn: rename cs_conn_mux() to sc_mux_ops() > CLEANUP: stconn: rename cs_appctx() to sc_appctx() > CLEANUP: stconn: rename __cs_endp_target() to __sc_endp() > CLEANUP: stconn: rename cs_get_data_name() to sc_get_data_name() > CLEANUP: stconn: rename cs_conn_*() to sc_conn_*() > CLEANUP: stconn: rename cs_conn_get_first() to conn_get_first_sc() > CLEANUP: stconn: rename cs_ep_set_error() to se_fl_set_error() > CLEANUP: stconn: make a few functions take a const argument > CLEANUP: stconn: use a single function to know if SC may send to SE > MINOR: stconn: consider CF_SHUTW for sc_is_send_allowed() > MINOR: stconn: remove calls to cs_done_get() > MEDIUM: stconn: always rely on CF_SHUTR in addition to cs_rx_blocked() > MEDIUM: stconn: remove SE_FL_RXBLK_SHUT > MINOR: stconn: rename SE_FL_RXBLK_CONN to SE_FL_APPLET_NEED_CONN > MEDIUM: stconn: take SE_FL_APPLET_NEED_CONN out of the RXBLK_ANY flags > CLEANUP: stconn: rename cs_rx_room_{blk,rdy} to sc_{need,have}_room() > CLEANUP: stconn: rename cs_rx_chan_{blk,rdy} to sc_{wont,will}_read() > CLEANUP: stconn: rename cs_rx_buff_{blk,rdy} to sc_{need,have}_buff() > MINOR: stconn: start to rename cs_rx_endp_{more,done}() to > se_have_{no_,}more_data() MINOR: stconn: add sc_is_recv_allowed() to check > for ability to receive CLEANUP: stconn: rename SE_FL_RX_WAIT_EP to > SE_FL_HAVE_NO_DATA MEDIUM: stconn: move the RXBLK flags to the stream > connector CLEANUP: stconn: rename SE_FL_WANT_GET to SE_FL_WILL_CONSUME > CLEANUP: stconn: remove cs_tx_blocked() and cs_tx_endp_ready() > CLEANUP: stconn: rename cs_{want,stop}_get() to se_{will,wont}_consume() > CLEANUP: stconn: rename cs_cant_get() to se_need_more_data() > CLEANUP: stconn: rename cs_{new,create,free,destroy}_* to sc_* > CLEANUP: stconn: rename remaining management functions from cs_* to sc_* > CLEANUP: stconn: rename cs{,_get}_{src,dst} to sc_* > CLEANUP: stconn: rename cs_{shut,chk}* to sc_* > CLEANUP: stconn: rename final state manipulation functions from cs_* to > sc_* CLEANUP: quic: drop the name "conn_stream" from the pool variable names > REORG: rename cs_utils.h to sc_strm.h > REORG: stconn: rename conn_stream.{c,h} to stconn.{c,h} > CLEANUP: muxes: rename "get_first_cs" to "get_first_sc" > DEV: flags: use "sc" for stream conns instead of "cs" > CLEANUP: check: rename all occurrences of stconn "cs" to "sc" > CLEANUP: connection: rename all occurrences of stconn "cs" to "sc" > CLEANUP: stconn: rename all occurrences of stconn "cs" to "sc" > CLEANUP: quic/h3: rename all occurrences of stconn "cs" to "sc" > CLEANUP: stream: rename all occurrences of stconn "cs" to "sc" > CLEANUP: promex: rename all occurrences of stconn "cs" to "sc" > CLEANUP: stats: rename all occurrences of stconn "cs" to "sc" > CLEANUP: cli: rename all occurrences of stconn "cs" to "sc" > CLEANUP: applet: rename all occurrences of stconn "cs" to "sc" > CLEANUP: cache: rename all occurrences of stconn "cs" to "sc" > CLEANUP: dns: rename all occurrences of stconn "cs" to "sc" > CLEANUP: spoe: rename all occurrences of stconn "cs" to "sc" > CLEANUP: hlua: rename all occurrences of stconn "cs" to "sc" > CLEANUP: log-forward: rename all occurrences of stconn "cs" to "sc" > CLEANUP: http-client: rename all occurrences of stconn "cs" to "sc" > CLEANUP: mux-fcgi: rename all occurrences of stconn "cs" to "sc" > CLEANUP: mux-h1: rename all occurrences of stconn "cs" to "sc" > CLEANUP: mux-h2: rename all occurrences of stconn "cs" to "sc" > CLEANUP: mux-pt: rename all occurrences of stconn "cs" to "sc" > CLEANUP: peers: rename all occurrences of stconn "cs" to "sc" > CLEANUP: sink: rename all occurrences of stconn "cs" to "sc" > CLEANUP: sslsock: remove only occurrence of local variable "cs" > CLEANUP: applet: rename appctx_cs() to appctx_sc() > CLEANUP: stream: rename stream_upgrade_from_cs() to > stream_upgrade_from_sc() CLEANUP: obj_type: rename OBJ_TYPE_CS to OBJ_TYPE_SC > CLEANUP: stconn: replace a few remaining occurrences of CS in comments > or traces DOC: internal: update the muxes doc to mention the stconn > CLEANUP: mux-quic: rename the "endp" field to "sd" > CLEANUP: mux-h1: rename the "endp" field to "sd" > CLEANUP: mux-h2: rename the "endp" field to "sd" > CLEANUP: mux-fcgi: rename the "endp" field to "sd" > CLEANUP: mux-pt: rename the "endp" field to "sd" > CLEANUP: stconn: rename a few "endp" arguments and variables to "sd" > MINOR: stconn: turn SE_FL_WILL_CONSUME to SE_FL_WONT_CONSUME > CLEANUP: stream: remove unneeded test on appctx during initialization > CLEANUP: stconn: remove the new unneeded SE_FL_APP_MASK > DEV: flags: fix "siet" shortcut name > DEV: flags: rename the "endp" shortcut to "sd" for "stream descriptor" > DEV: flags: reorder a few SC/SE flags > DOC: internal: add a description of the stream connectors and > descriptors > > --- > > > ******************************************************************************************************************************************************************************************************************************************************* > > DISCLAIMER: > > “IMPORTANT NOTICE: "Information contained and transmitted by this EMAIL > including any attachment is proprietary to NPCI and is intended solely for > the addressee/s, and may contain information that is privileged, confidential > or exempt from disclosure under applicable law. Access to this email and/or > to the attachment by anyone else is unauthorized. If this is a forwarded > message, the content and the views expressed in this EMAIL may not reflect > those of the NPCI. If you are not the intended recipient, an agent of the > intended recipient or a person responsible for delivering the information to > the named recipient, you are notified that any use, distribution, > transmission, printing, copying or dissemination of this information in any > way or in any manner is strictly prohibited. > > If you are not the intended recipient of kindly delete this email from your > system and inform the sender. There is no guarantee that the integrity of > this communication has been maintained and nor is this communication free of > viruses, interceptions or interference”. > > ********************************************************************************************************************************************************************************************************************************************************
