Just a little bit more... :)
SATA is already 150MB/s, with the 300MB/s SATAII already growing in popularity. These are point-to-point, dedicated ports.
This, compared to the 50-70MB/s you'd likely actually get off gigabit ethernet...
Greg
----- Original Message ----- From: "Eli Allen" <[EMAIL PROTECTED]>
To: "The Hardware List" <[email protected]>
Sent: Wednesday, March 30, 2005 5:11 AM
Subject: Re: [H] Idea regarding internal system interconnects.
In addition to what Catalin said:
1) controller chips for networking are much more complex then the stuff currently used. This leads to bigger chips and supporting electronics which are more expensive, greater power usage, greater heat output
2) I'm pretty sure you need to run some sort of protocol ontop of ethernet which raises complexity even more
3)ethernet is much much higher in latency
4)ethernet needs more cpu time
----- Original Message -----Just out of curiosity. Wouldn't using gigabit networking for connecting perhiperals inside a system be good?
I mean a mobo could have a 8 port switch, for example.
1 port for CDROM 1 port for DVD Hard disks..
etc.
Since it would be a switch, each device would have a full gigabit of bandwidth.
I am sure it could be done.
As far as bandwidth is concerned.....
1 Gbps = 125 Mega Bytes a second theoretical. Even assuming 10% overhead for TCP packets and all that, we are still talking about 100 Megabytes per second per device.
