One would hope that Windows would assign each interface a different metric.
That's why I wanted the "route print" output.
For a given address, windows should choose the interface with the lowest
metric.
Greg
----- Original Message -----
From: "Mesdaq, Ali" <[EMAIL PROTECTED]>
To: "The Hardware List" <[email protected]>
Sent: Tuesday, April 25, 2006 1:19 PM
Subject: RE: [H] Network, Internet Problem
I believe what's happening is that since they are both on the same
network address you basically have 2 default gateways on each card. How
would the OS know which one to go out on if it's on the same range?
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of rls
Sent: Tuesday, April 25, 2006 10:59 AM
To: 'The Hardware List'
Subject: [H] Network, Internet Problem
I have 2 network cards in my computer. One connects to a cable
modem/router
the other card connects to a DSL router.
Each router is set up with networks using 192.168.2.x.
When I have both cards enabled I cannot connect to the internet. When I
disable either card I can connect.
What's going on?
Would things improve if I changed the network addresses range on either
router?
