There are X10 setups that can do this by hardware or
software schedule.

A PUM01 has 24VDC dry-contacts I'd imagine could
handle [EMAIL PROTECTED] There are also 
120V appliance 3-prong modules but I find that loads
like PSU's tend to turn the 
module back on when you turn it off. Partially by
design since turning an 
attached load off-then-on act as local "on" override,
partially because the 
module never totally disconnects the load which
trickles & trips the on.

I think the bigger issues are:

1. telling windows to eject the drive before you shut
it's power off, not seen a 
command line to "safe remove" a usb device.

2. Even with no write cache/"optimize for quick
removal", unplugging always 
seems to result in windows DWF errors even hours after
last write.

3. There still a data cable connecting the drive to a
pc, so surge could still 
damage the external drive.

Switch:
X-10 PRO Universal Module PUM01
        
Computer interfaces:
PowerLinc Controller & Home Automation Software 1132CU
X10 PRO 2-Way Powerline Interface PSC05
X-10 CM11A X10 2-Way Interface


Anthony Q. Martin wrote:
> What would be really nice is to have a drive that
can be turned on my 
> software....so that when it's time for a scheduled
backup, the software 
> turns on the drive, waits for it to be ready, and
then does the backup 
> task...then finally powers the drive down.
> 
> Why don't have have this already?
> 
> Al wrote:
>> FORC5 <[EMAIL PROTECTED]> wrote:
>>
>>  
>>> FWIW I use System Guardian ( Standby Disk )
>>> IMO is nothing finer.
>>> fp
>>>     
>>
>> I'm glad it works for you.
>> I see a point of weakness with this method. Both
drives are hot all the
>> time. A errant power supply (power
spike/lightening/fire
>> sprinklers/spilled cup-o-joe/...) could take out
both drives.
>>
>> I used to do something similar with Partition
Magic, and a second drive
>> with it's own power switch. Turn on the second
drive power switch, boot
>> from a floppy with PM and copy the drive. May still
be vulnerable to
>> lightening. But the backup drive isn't hot all the
time. Then I
>> discovered and used removable drive racks; which
allowed moving
>> the backup to a safe location.
>>
>> Always liked the full working copy instead of a
restore routine.
>>
>> Not to suggest it would work for T, as he was
look'n for scheduled 
>> backups.
>>
>>   
> 
> 


      
____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  
http://tools.search.yahoo.com/newsearch/category.php?category=shopping

Reply via email to