Thankyou Ben,
This makes sense to me. Yes, I do still have netbios enabled on the
network, each client. I do still recall, from years ago, that netbios
should be disabled as a security enhancement (grc.com?), but I have not
gotten back to that yet, and, my network may not be fully enabled yet cuz I
think I keep dicking with it, I suppose!! I do accept that a lot of pebcak
still exists at this address!
I'll leave my 'hosts' and 'lmhosts' files alone! Just checking........ :)
Ah, 'hostname' call. Nope, not yet. I have not yet assigned the device a
hostname. Thankyou.
I will continue my troubleshooting of the brick.
Best,
Duncan
At 13:03 01/14/2008 -0500, you wrote:
If you're just trying to ping something to see if it's alive, you don't
need to touch any files on your PC.
You shouldn't really need to touch hosts/lmhosts unless netbios isn't
enabled on your network, or you want to reach a device on your network
that doesn't use netbios and you want to use a hostname instead of an IP.
DHSinclair wrote:
Ben,
I do not know. Why I asked. I suppose I asked because in testing my old
router yesterday, it would not respond to pings or a direct http call
even though I had given it an IP addy that was unique and on my chosen
subnet. Oddly, the router looked (externally) as though the switch
portion was dead. No LEDs, no activity, no nothing In or Out...... still
troubleshooting.....
The only "touching" I do to my "hosts" file is every month when I
download a new "host" file from sysInternals; and, then install it on
each client. I read somewhere that the lmhosts file is used so my
clients 'know' who everyone is. Did I miss something?
Yes, I do not have an active domain or domain controller.
All my clients use the default 'workgroup' in my network setups.
No, I do not use DHCP.
Thanks. Best,
Duncan
At 11:58 01/14/2008 -0500, you wrote:
Why would you need to touch your lmhosts file at all? You should only
touch hosts, and even then you don't need to change that if you're just
bringing something you want to telnet to on your network.
DHSinclair wrote:
If I believe I need to bring another device (an old router) on to my
LAN for continued troubleshooting, should I update my current client's
lmhost file to disclose this "new" device B4 I plug the brick in?
The reason to put the device on my LAN is to try and see if the http
interface works or not.
So far, only the old telnet (rs-232c) works to this device........ :(
Thanks,
Duncan
