On review said that the 8 port version worked under UNRAID.
On 7/5/2016 11:43 AM, Tim Lider wrote:
I do not know about the Linux drivers. Although, it does seem to be working
under Ubuntu very well. Windows 10 does not need drivers for the controller,
not did the Linux Build at the shop.
Tim Lider
Brown Belt Arnis de Mano
https://www.facebook.com/CardenasArnis
-----Original Message-----
From: Hardware [mailto:[email protected]] On Behalf Of
Steve Tomporowski
Sent: Tuesday, July 5, 2016 8:13 AM
To: [email protected]
Subject: Re: [H] SATA Add-in Card
Linux drivers?
On 7/5/2016 11:12 AM, Tim Lider wrote:
I personally use and professionally use:
IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid with Low
Profile Bracket SI-PEX40064
You can get it on Amazon:
https://www.amazon.com/IO-Crest-Controller-Non-Raid-SI-PEX40064/dp/B00AZ9T3OU/ref=sr_1_3?ie=UTF8&qid=1467731417&sr=8-3&keywords=pci-e+card+sata+6.0
This card works very well in an ACHI environment and supports Hot plugging (A
must for a Data Recovery guy such as myself. Personally it is used as an add-on
card to support more HD's that my motherboard cannot (So much Anime).
Tim Lider
Brown Belt Arnis de Mano
https://www.facebook.com/CardenasArnis
-----Original Message-----
From: Hardware [mailto:[email protected]] On Behalf Of
Steve Tomporowski
Sent: Tuesday, July 5, 2016 7:37 AM
To: [email protected]
Subject: [H] SATA Add-in Card
I'm upgrading my server (running UNRAID) and at this point I've run out of
SATA ports on the MB (all 6 full). So I'm looking for recommendations on an
add-on card, preferably PCI-E (I've got empty slots), but the card will need
Linux drivers.
Any Ideas?
Thanks...Steve
