No. You need to use the Unifi Controller software to adopt the new Unifi on to the existing network.
You do this by plugging into your normal network. On Mon, Oct 5, 2020 at 9:09 PM _ Winterlight <winterli...@outlook.com> wrote: > >>>ou'll need to have it connected through ethernet > > by that you mean plug the existing Unifi directly into the new Unifi ? So > I leave the router plugged into the existing Unifi and use the free port to > plug into the new Unifi ... which new Unifi port the router or the second > one? > ________________________________ > From: Hardware <hardware-boun...@lists.hardwaregroup.com> on behalf of > Christopher Fisk <christopher.f...@thefisks.org> > Sent: Monday, October 5, 2020 6:01 PM > To: hardw...@lists.hardwaregroup.com <hardw...@lists.hardwaregroup.com> > Subject: Re: [H] My second Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO > Access Point > > When you launch the Unifi controller software you can adopt the new > controller. You'll need to have it connected through ethernet when you do > that. > > Once the device is adopted and provisioned you can unplug it and use the > wireless uplink. > > > Good luck! I love these devices, I use them all over the place at work. > > On Mon, Oct 5, 2020 at 7:50 PM _ Winterlight <winterli...@outlook.com> > wrote: > > > I purchased a second Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO > > Access Point (UAP-AC-PRO-US), Single,White. I have been using the > existing > > one for the last 3 years and I want to put a second one in my back yard. > > Once I plug it into the existing network will it configure itself as an > > extender? If not what do I have to do to make them work together? Thanks > > > > <w> > > >
