thanks fp At 02:33 PM 1/23/2011, Greg Sevart Poked the stick with: >Around 1.2 volts should be the Vcc standard. I haven't looked at my VID, but >my BIOS reports 1.168v as stock for my 2500K. > >1.5 is the DDR3 JEDEC standard. 1.35 is the DDR3L (low voltage) JEDEC >standard. >1.65 is the Intel-recommended absolute maximum voltage for Vdimm. > >Usually, your JEDEC-standard speeds and CAS timings will be 1.5; 1.65 is >going to be for anything above standard. > >> -----Original Message----- >> From: [email protected] [mailto:hardware- >> [email protected]] On Behalf Of FORC5 >> Sent: Sunday, January 23, 2011 2:20 PM >> To: [email protected] >> Subject: [H] SB memory ? >> >> What voltage do the new SB CPU's run at ? can not find info >> >> Seeing DDR3 at 1.65 and 1.5v. I am thinking 1.5 better. What is ? >> fp >> >> >> -- >> Tallyho ! ]:8) >> Taglines below ! >> -- >> You are magnetic in your bearing. > > > > >__________ Information from ESET Smart Security, version of virus signature >database 5811 (20110123) __________ > >The message was checked by ESET Smart Security. > >http://www.eset.com
-- Tallyho ! ]:8) Taglines below ! -- Women and elephants never forget real or supposed injury.
