At 02:20 PM 30/09/2011, Thane Sherrington wrote:
I have a 2K3 server with an admin password that was changed by a
disgruntled employee. Normally I'd boot with a PE disk, run
ntpwedit and change it. But this drive is using a software RAID
(with, strangely, only one hard drive currently connected, but
that's another issue.) The software RAID means the drive comes up
as a dynamic drive and I can't access it by a drive letter in
BartPE. Any ideas how I can crack this password?
Figured it out. I'm good.
T
