On Wed, Oct 29, 2008 at 12:08 PM, Ole Kliemann < [EMAIL PROTECTED]> wrote:
> Hi Joerg and others, > > I haven't followed the whole thread as I only understand 1%. So just one > quick and dirty question: > > I have the two years EU warranty and am going to send my FR to my > distributor anyway because GPS is not working with the internal antenna. > (Independant of SD card.) > > So if I send it in, is there any fix that could be applied for the > buzz? Or is it worth to wait, say another week, because there will be > something then? > > And - if you allow me to be off-topic - is there any improvement fix for > the headphone jack? I mean this hipass-filtering issue making music > sound quite tinny. > > Thanks! > Ole > > Hi Ole, I don't know whether Joerg has attempted the hardware fix yet. I finished mine yesterday. Attaching the bead to the pad of pin 4 does NOT fix the GSM buzz issue. There are a couple of pictures. Connector with pad 4 removed: http://handheldshell.com/connector.jpg It's a little hard to see, in this photo the bead is soldered standing up on pin4 with a jumper wire from the top of the bead to the side of the headset plug. http://handheldshell.com/board.jpg With this change the buzz is just as bad as ever. Angus -- Angus Ainslie http://www.handheldshell.com/
_______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
