Thanks for the answer! The point is, i certainly won't do the fix myself. ;) I will send my device to my distributor on warranty.
On Thu, Oct 30, 2008 at 12:11:47PM +0200, Joerg Reisenweber wrote: > Seems you always could "upgrade" to the 'botch' fix found in A7 (It *should* > work, as our TPE engineers found it worth to implement in A7 ;-): So as this fix is officially approved, I assume my distributor will either be able to apply it or provide me with an A7. Gonna check with them soon. > > And - if you allow me to be off-topic - is there any improvement fix for > > the headphone jack? I mean this hipass-filtering issue making music > > sound quite tinny. > a) place some decent 100uF (or as high cap as feasible) parallel to C4110 and > C4111. Make sure you don't create another contamination path for RF creeping > inside big can - maybe use a ferrite ring to block RF next hole where you > route some wires from those big caps inside can to C4110/11. > b) *short* C4110 / C4111, and insert the 100uF somewhere else in audiopath, > b1)e.g. near R4405 / R4407 (you can even replace these R by 100uF > capacitors). > You should remove R4117 and R4117 then, and instead place these 1k from > JK4401:pin2 and pin3 (! for JACK_INSERT function) to GND > b2) or even place the 100uF outside FR in the housing of your hs-plug or > 2.5->3.5mm adapter Is this somewhat official? Is it included in any newer revision? If not, I don't think I can convice my distrubtor to do it on warranty. ;) Ole
pgpDDL5dJhnH9.pgp
Description: PGP signature
_______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
