On Monday 19 October 2009 13:21:00 Gustav Degreef wrote:
> Folks, thanks for your efforts to get these devices running.
>
> The ipaq outputs the following text on the screen after trying to run
> haret.exe:
>
> HaRET boot
> Shutting down hardwarE
> In Preloader
> PSR=600000df
> disabling framebuffer feedback
>
> I created the file earlyharetog.txt and ran haret.exe from the device.  The
> file however remains empty.
>
>
> Here is my setup:
>
> HP rx1950 with 2 GB San Disk  SD card.
>
> # df -h
> /dev/mmcblk0p1        951M  1.8M  950M   1% /media/disk
> /dev/mmcblk0p2        969M  138M  783M  15% /media/disk-1
>
> fdisk -l
>         Device Boot      Start         End      Blocks   Id  System
> /dev/mmcblk0p1               1         484      975712+   b  W95 FAT32
> /dev/mmcblk0p2             485         984     1008000   83  Linux
>
> contents of /dev/mmcblk0p1:
> linux-in3g:/media/disk/linux/Ramdisk # ls
> default.txt  default.txt~  earlyharetlog  haret-0.5.3-rx1950.exe  zImage
>
> contents of the file default.txt:
>
> set kernel "zImage"
> set CMDLINE rootdelay=1 root=/dev/mmcblk0p2 console=tty0 mem=64M
> fbcon=rotate:1 video=pxafb:mode:240x320-16,active
> #set cmdline "root=/dev/mmcblk0p2 rootdelay=5 psplash=false"
> set kernel_offset 0x90000
>
> bootlinux
>
> I tried both set cmdline options, that's why one of them is hashed out.
> Neither produces any difference.  I tried changing
> root=root=/dev/mmcblk0p1, but that did not make any difference either.
>
>
> contents of /dev/mmcblk0p2:
> linux-in3g:/media/disk-1 # ls
> Angstrom-opie-image-glibc-ipk-2009.X-test-20090929-rx1950.rootfs.tar  bin
> boot  dev  etc  home  lib  linuxrc  lost+found  media  mnt  proc  sbin  sys
> tmp  .Trash-0  usr  var
>
> I've tried many times to get it to work without success.  The boot message
> remains on the screen, and I have to reset the device to get it to work
> again.  Seems to have not suffered any damage as a result.  Any help
> getting this running would be appreciated.  Gustav Degreef.

You didn't specify what kernel are you using, what type of FS is on second 
partiion on card, and your uncommented cmdline is totaly incorrect, use 
commented one.

You definitely do something wrong, as I have reports that 
bootloader/kernel/rootfs I've posted are working.

Regards
Vasily

Attachment: signature.asc
Description: This is a digitally signed message part.

_______________________________________________
Haret mailing list
[email protected]
https://handhelds.org/mailman/listinfo/haret

Reply via email to