No idea if this is a problem, I'm just skimming code and noticed the status code is not the same for hdmi_in0 and hdmi_in1 The #endif is in a different place:
clearly see it here: https://github.com/timvideos/HDMI2USB-litex-firmware/blob/master/firmware/ci.c#L465 https://github.com/timvideos/HDMI2USB-litex-firmware/blob/master/firmware/ci.c#L465 kinda see it here: static void status_print(void) { unsigned int underflows; #ifdef CSR_HDMI_IN0_BASE wprintf( "input0: %dx%d", hdmi_in0_resdetection_hres_read(), hdmi_in0_resdetection_vres_read()); #ifdef CSR_HDMI_IN0_FREQ_BASE wprintf(" (@" REFRESH_RATE_PRINTF " MHz)", REFRESH_RATE_PRINTF_ARGS(hdmi_in0_freq_value_read() / 10000)); if(hdmi_in0_status()) { wprintf(" (capturing)"); } else { wprintf(" (disabled)"); } #endif wputchar('\n'); #endif #ifdef CSR_HDMI_IN1_BASE wprintf( "input1: %dx%d", hdmi_in1_resdetection_hres_read(), hdmi_in1_resdetection_vres_read()); #ifdef CSR_HDMI_IN1_FREQ_BASE wprintf(" (@" REFRESH_RATE_PRINTF " MHz)", REFRESH_RATE_PRINTF_ARGS(hdmi_in1_freq_value_read() / 10000)); #endif if(hdmi_in1_status()) { wprintf(" (capturing)"); } else { wprintf(" (disabled)"); } wputchar('\n'); #endif -- Carl K -- You received this message because you are subscribed to the Google Groups "hdmi2usb - A HDMI capture solution" group. To unsubscribe from this group and stop receiving emails from it, send an email to hdmi2usb+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/hdmi2usb/CADmzSSh71DtAaSnt1PqDc_dkT-0-yz4xVzOOXCpSD%2BAaN_0Fnw%40mail.gmail.com.