Hello Andrey, plese - take a look at http://git.gnucapplus.org/gitweb/
1) gnucap-mot-adms.git http://git.gnucapplus.org/gitweb/?p=gnucap-mot-adms.git;a=summary This is port of NGSpice mot-adms (made by Laurent Lemaitre) to gnucap gnucap can use (-a switch, .attach .load commands) plugins, including models and can understand Spice, BSIM and NGspice models. This tool uses NGspice interface and allows to compile Verilog-A models into C code, which then shall be compiled into *.so and then attached and used in gnucap. 2) gnucap-icarus.git http://git.gnucapplus.org/gitweb/?p=gnucap-icarus.git;a=summary This plugin allows co-simulation of icarus and gnucap more details inside :) Regards Gena Tuesday, October 26, 2010, 1:02:52 PM, you wrote: AF> Hallo, AF> I am interested in using Verilog-A files with gnucap. If this is AF> still not possible I would like to make something AF> (proof-of-concept at first, probably with Icarus Verilog as compiler). AF> On gnucap-wiki-homepage site is written "You can also use the AF> "ADMS" model compiler, to generate a Spice model, ...", but I AF> haven't found either any working example nor any *.c-file on the ADMS-homepage. AF> Also on the same wiki-page is written "There is work in progress AF> to use Icarus Verilog as the [Verilog?] model compiler." AF> Does somebody know if one of these two projects is really working AF> and if "Icarus Verilog Code Generator"-like-project would be still useful? AF> Thanks in advance, AF> Andreas AF> _______________________________________________ AF> Help-gnucap mailing list AF> [email protected] AF> http://lists.gnu.org/mailman/listinfo/help-gnucap -- Best regards, Gserdyuk mailto:[email protected] _______________________________________________ Help-gnucap mailing list [email protected] http://lists.gnu.org/mailman/listinfo/help-gnucap
