From: Jordan Uggla <[email protected]> Date: Sat, 14 Jun 2014 00:01:20 -0700 > ... don't have a grub.cfg in (hd0,msdos1)/boot/grub/grub.cfg ...
It is there. http://carnot.yi.org/GrubInstallationStory > ... or that grub.cfg doesn't have any menu entries. There is an entry for Native Oberon. http://carnot.yi.org/GrubInstallationStory > Please post your complete grub.cfg ... In GrubInstallationStory it follows "cat /mnt/boot/grub/grub.cfg". > ... output of "grub-probe --target=device /boot/grub/grub.cfg" ... At the end of the GrubInstallationStory. > ... "grub-mkrelpath /boot/grub/grub.cfg". Ditto. Just prior to the Grub command prompt is this screen. http://carnot.yi.org/GrubScreen.png ae5f..6e91 is the /root part in the host used to install Grub; but Grub should be reading the hdd in the extant host. Commands "chainloader (hd0,5)+1", "boot" at the grub prompt start the OS. If Grub can be coerced to read the hdd where it is, rather than hunt for the hdd were it was, then the menu is likely work. Incidentally, https://www.gnu.org/software/grub/manual/html_node/Invoking-grub_002dmkconfig.html#Invoking-grub_002dmkconfig explains where output is delivered. Equally important is the input used to create the output. It should be documented. Thanks for the replies, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 12 Tel +1 360 639 0202 http://carnot.yi.org/ Bcc: peter at easthope. ca _______________________________________________ Help-grub mailing list [email protected] https://lists.gnu.org/mailman/listinfo/help-grub
