Hello, I don't believe that network manager is the default tool that guix uses... I think I use whatever is the default and it works for me...
Does the normal guix not provide you with a working Internet connection? April 5, 2019 5:41 AM, [email protected] (mailto:[email protected]) wrote: Hello! I have several questions about wpa-supplicant + dhcpcd services. First of all I do not want to use networkmanager and I usually get Internet working manually with this: # cat startnet #!/bin/sh #connect to wi-fi through wpa_supplicant herd stop wpa-supplicant rfkill unblock wifi wpa_supplicant -B -i wlp2s0 -c /etc/wpa_supplicant/wpa_supplicant.conf sleep 2 dhclient -v wlp2s0 #./startnet I configured services wpa-supplicant and dhcpcd in my config.scm (in attach). Guix reconfigures my system normally, start services wpa-supplicant, networking, dhcpv4-daemon. But these services do not give me Internet. `ping gnu.org` says unknow host. The wpa_supplicant.conf is the same as I use. But dhcpcd.conf is that from one forum. I really do not know what to write there. ip of my router is 192.168.1.1 but the other lines are from forum. Please, let me see how configure dhcpcd if usually I used `dhclient -v wlp2s0`. What to type there? Also is it ok my wpa-supplicant-service-type config? And why I have NetworkManager in my /var/log/messages, is networkmanager living in my system? How to push it out? Apr 4, 2019, 8:36 PM by [email protected] (mailto:[email protected]): Hi! There actually were wpa-supplicant config twice. The necessary one is in the (modify-services) section. I rest only that one. And it works. But the network is not working, cause dhcpd is not configured. I really want to get around "[email protected] causes slow startup" https://wiki.archlinux.org/index.php/Dhcpcd (https://wiki.archlinux.org/index.php/Dhcpcd) Would you give some advises how to prevent slow booting? How to set timeout on wpa-supplicant service and dhcpcd that they'll start after slim shows me auth form? My actual manual network start is this: # cat startnet #!/bin/sh #connect to wi-fi through wpa_supplicant herd stop wpa-supplicant rfkill unblock wifi wpa_supplicant -B -i wlp2s0 -c /etc/wpa_supplicant/wpa_supplicant.conf sleep 2 dhclient -v wlp2s0 May be I can use dhclient service or something like that instead of dhcpcd? I attached my current workable config, but dhcpcd is commented there. Also I do not know how to write dhcpd.conf for my case? Apr 4, 2019, 7:26 PM by [email protected] (mailto:[email protected]): Hello! I am so novice in Guile. I have trouble trying to add wpa-supplicant configuration to my config. I get this error: # guix system reconfigure /etc/config.scm guix system: error: service 'wpa-supplicant' provided more than once Please, let me know where to place my wpa-config lines?
