Andreas Reuleaux <[email protected]> writes:
> Hi, > > thanks a lot, and yes: that was it. :) > > I had not really understood that w/ > > (define-module (gnu packages emacs-hide-comnt) > > my emacs-hide-comnt package was searched in gnu/packages, > but oh well: this makes sense after all, and I am learning. > > I have received your reply only privatly so far (to my [email protected] > address), not from the mailing list - but I am Cc'ing there > nevertheless already. > That's my fault, I mixed up and used an incorrect email address when sending the email: this address is not subscribed to the list. Sorry. > Fixed in my http://git.a-rx.info/channel now (i.e. emacs-hide-comnt.scm > updated there). > > I will add more packages there, as I progress. > > In case anyone wants to try my configuration: I am kind of lazy: > creating new initial commits all to often (instead of pushing them). > > thus the ~/.config/guix/channels.scm needs to be changed accordingly, > currently: > > > --8<---------------cut here---------------start------------->8--- > (cons (channel > (name 'my-stuff) > > > (url "git://git.a-rx.info/channel") > > (introduction > (make-channel-introduction > "109737fce5bd8f8f709646d3e1b2f519a07e2f9d" > (openpgp-fingerprint > "99BB E77D 73AE 07B9 D4B0 CA2E 3384 11E5 6E09 31B5") > )) > > ) > %default-channels) > --8<---------------cut here---------------end--------------->8--- > > > Many thanks again, > > -A > > > > > Edouard Klein <[email protected]> writes: > >> Hi, >> >> I am not sure, but here is my try: >> >> I cloned your channel2 repo, and saw in emacs-hide-comnt.scm: >> >> (define-module (gnu packages emacs-hide-comnt) >> >> Modules names in Guile (in all schemes ?) must match the path, so either >> put emacs-hide-comnt.scm in gnu/packages, or change the above line to: >> >> (define-module (emacs-hide-comnt) >> >> See that urweb.scm starts with: >> (define-module (urweb) >> >> My interpretation is that the error message means that the >> emacs-hide-comnt module was not found where it was looked for, i.e. in >> gnu/packages. >> >> This may not be the only problem, but it is worth a try. >> >> Good luck :) >> >> Cheers, >> >> Edouard. >> >> >> Andreas Reuleaux <[email protected]> writes: >> >>> Hi, >>> >>> I am trying to set up my own channel for some personal packages, >>> and I do have some success to that end, but I am still experiencing >>> issues: >>> >>> >>> TL;dr - short summary: >>> >>> my package: emacs-hide-comnt.scm (below) breaks my setup for "guix pull" >>> (which otherwise works just fine without that package) >>> my package emacs-hide-comnt.scm cannot be too bad either: >>> I can build+install it just fine by hand. >>> >>> >>> >>> I am following the guix guide, and have stolen two packages from >>> >>> --8<---------------cut here---------------start------------->8--- >>> https://github.com/jsoo1/guix-channel >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> namely emacs-dump.scm (which provides my-emacs-dump), and >>> urweb.scm. >>> >>> I have set up my own git repo (with just these two packages for now) at: >>> >>> --8<---------------cut here---------------start------------->8--- >>> http://git.a-rx.info/channel >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> and (with a git-url) in my ~/.config/guix/channels.scm: >>> >>> --8<---------------cut here---------------start------------->8--- >>> (cons (channel >>> (name 'my-stuff) >>> >>> >>> (url "git://git.a-rx.info/channel") >>> >>> (introduction >>> (make-channel-introduction >>> "56384c65b5d57606cd7ff3e2a4db1c99c24d7adf" >>> (openpgp-fingerprint >>> "99BB E77D 73AE 07B9 D4B0 CA2E 3384 11E5 6E09 31B5") >>> )) >>> >>> ) >>> %default-channels) >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> >>> I can "guix pull" (I am using "--allow-downgrades" the first time here, as >>> I have used >>> channel my-stuff with a different inital commit before), anyway this >>> works fine so far - guix pull does not complain about the my-stuff channel. >>> >>> --8<---------------cut here---------------start------------->8--- >>> rx@dell ~$ guix pull --allow-downgrades >>> Updating channel 'my-stuff' from Git repository at >>> 'git://git.a-rx.info/channel'... >>> guix pull: warning: moving channel 'my-stuff' from >>> 12ac4ab75c0b9dc247af3a65179c566e198d908d to unrelated commit >>> 56384c65b5d57606cd7ff3e2a4db1c99c24d7adf >>> Updating channel 'guix' from Git repository at >>> 'https://git.savannah.gnu.org/git/guix.git'... >>> Building from these channels: >>> guix https://git.savannah.gnu.org/git/guix.git 63fec9f >>> my-stuff git://git.a-rx.info/channel 56384c6 >>> Computing Guix derivation for 'x86_64-linux'... / >>> substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0% >>> substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'... >>> 100.0% >>> The following derivations will be built: >>> /gnu/store/dsb3bcmddgsvn34wxh0g2mbm4lyq1haz-profile.drv >>> /gnu/store/d227lqkghmg48b34b81si8hdmz3vba64-my-stuff.drv >>> /gnu/store/mcp30c79gi9cdnckg4ghahkaygn85ykk-inferior-script.scm.drv >>> /gnu/store/d84yrjgr6bkg7c6h9i0bxjz7cfxhisp2-profile.drv >>> /gnu/store/vrr8flhvf06xprqm6n9q45pj10h7r10g-inferior-script.scm.drv >>> >>> building >>> /gnu/store/mcp30c79gi9cdnckg4ghahkaygn85ykk-inferior-script.scm.drv... >>> building /gnu/store/d227lqkghmg48b34b81si8hdmz3vba64-my-stuff.drv... >>> building CA certificate bundle... >>> listing Emacs sub-directories... >>> building fonts directory... >>> building directory of Info manuals... >>> building database for manual pages... >>> building profile with 2 packages... >>> building >>> /gnu/store/vrr8flhvf06xprqm6n9q45pj10h7r10g-inferior-script.scm.drv... >>> building package cache... >>> building profile with 2 packages... >>> New in this revision: >>> 2 new packages: lsofgraph, urweb >>> >>> rx@dell ~$ guix pull >>> Updating channel 'my-stuff' from Git repository at >>> 'git://git.a-rx.info/channel'... >>> Updating channel 'guix' from Git repository at >>> 'https://git.savannah.gnu.org/git/guix.git'... >>> Building from these channels: >>> guix https://git.savannah.gnu.org/git/guix.git 63fec9f >>> my-stuff git://git.a-rx.info/channel 56384c6 >>> Computing Guix derivation for 'x86_64-linux'... / >>> nothing to be done >>> >>> rx@dell ~$ >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> and "urweb" is available, for example >>> >>> --8<---------------cut here---------------start------------->8--- >>> rx@dell ~$ guix package -A urwe >>> urweb 20190217 out urweb.scm:15:2 >>> rx@dell ~ >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> >>> >>> Thus apparently my setup is not too bad (including my rx.key in the >>> keyring branch etc.). >>> >>> >>> Now I am setting up a second channel2 instead: again with the two packages >>> emacs-dump.scm and urweb.scm as above, but additionally an emacs package >>> that I have created myself: emacs-hide-comnt.scm >>> >>> (Really this is just a prerequisite for another package that I am >>> interested in, and I have a package definition for as well: >>> emacs-thing-cmds.scm - but I keep that question for another mail): >>> >>> Now with my ~/.config/guix/channels.scm for channel2: >>> >>> --8<---------------cut here---------------start------------->8--- >>> (cons (channel >>> (name 'my-stuff2) >>> >>> >>> (url "git://git.a-rx.info/channel2") >>> >>> (introduction >>> (make-channel-introduction >>> "3a64194919ceeb16ee03df17de2c3c612d410145" >>> (openpgp-fingerprint >>> "99BB E77D 73AE 07B9 D4B0 CA2E 3384 11E5 6E09 31B5") >>> )) >>> >>> ) >>> %default-channels) >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> >>> I cannot pull any more: >>> >>> --8<---------------cut here---------------start------------->8--- >>> rx@dell ~$ guix pull >>> Updating channel 'my-stuff2' from Git repository at >>> 'git://git.a-rx.info/channel2'... >>> Updating channel 'guix' from Git repository at >>> 'https://git.savannah.gnu.org/git/guix.git'... >>> Building from these channels: >>> guix https://git.savannah.gnu.org/git/guix.git 63fec9f >>> my-stuff2 git://git.a-rx.info/channel2 3a64194 >>> Computing Guix derivation for 'x86_64-linux'... - >>> substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0% >>> substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'... >>> 100.0% >>> The following derivations will be built: >>> /gnu/store/1vvwqnj7d1hp8nf8kcpf1r5wrlibkxya-profile.drv >>> /gnu/store/hiqych1a0qdmdzq45mi1k96df9zr0p7k-my-stuff2.drv >>> /gnu/store/b0hk5dvfid7pkjxrwfylmkn5w3pwzbxq-inferior-script.scm.drv >>> /gnu/store/5ww6yaqz98jnkp2gfdpjzksx5azwd63i-inferior-script.scm.drv >>> /gnu/store/j9w5gvf7slfc1ahmryd45i0nfr3j8509-profile.drv >>> >>> building >>> /gnu/store/b0hk5dvfid7pkjxrwfylmkn5w3pwzbxq-inferior-script.scm.drv... >>> building /gnu/store/hiqych1a0qdmdzq45mi1k96df9zr0p7k-my-stuff2.drv... >>> |builder for `/gnu/store/hiqych1a0qdmdzq45mi1k96df9zr0p7k-my-stuff2.drv' >>> failed to produce output path >>> `/gnu/store/ww01v7zdx110q887146y9m67j3rikypw-my-stuff2' >>> build of /gnu/store/hiqych1a0qdmdzq45mi1k96df9zr0p7k-my-stuff2.drv failed >>> View build log at >>> '/var/log/guix/drvs/hi/qych1a0qdmdzq45mi1k96df9zr0p7k-my-stuff2.drv.bz2'. >>> cannot build derivation >>> `/gnu/store/1vvwqnj7d1hp8nf8kcpf1r5wrlibkxya-profile.drv': 1 dependencies >>> couldn't be built >>> guix pull: error: build of >>> `/gnu/store/1vvwqnj7d1hp8nf8kcpf1r5wrlibkxya-profile.drv' failed >>> rx@dell ~$ >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> with >>> >>> --8<---------------cut here---------------start------------->8--- >>> rx@dell ~$ bzcat >>> '/var/log/guix/drvs/hi/qych1a0qdmdzq45mi1k96df9zr0p7k-my-stuff2.drv.bz2' >>> (repl-version 0 1 1) >>> (exception misc-error (value #f) (value "no code for module ~S") (value >>> ((emacs-hide-comnt))) (value #f)) >>> rx@dell ~$ >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> >>> Apparently my emacs-hide-comnt.scm package >>> at http://git.a-rx.info/channel2/tree/ breaks my setup. >>> >>> And I don't see why: I can download the package and build/install it >>> just fine: >>> >>> --8<---------------cut here---------------start------------->8--- >>> rx@dell ~$ wget -nd http://git.a-rx.info/channel2/plain/emacs-hide-comnt.scm >>> --2021-08-28 16:46:47-- >>> http://git.a-rx.info/channel2/plain/emacs-hide-comnt.scm >>> Resolving git.a-rx.info (git.a-rx.info)... 178.79.166.98 >>> Connecting to git.a-rx.info (git.a-rx.info)|178.79.166.98|:80... connected. >>> HTTP request sent, awaiting response... 200 OK >>> Length: 2035 (2.0K) [text/plain] >>> Saving to: ‘emacs-hide-comnt.scm’ >>> >>> emacs-hide-comnt.scm >>> 100%[===============================================================>] >>> 1.99K --.-KB/s in 0s >>> >>> 2021-08-28 16:46:47 (324 MB/s) - ‘emacs-hide-comnt.scm’ saved [2035/2035] >>> >>> rx@dell ~$ >>> --8<---------------cut here---------------end--------------->8--- >>> >>> --8<---------------cut here---------------start------------->8--- >>> rx@dell ~$ guix build -f emacs-hide-comnt.scm >>> /gnu/store/w098p5vxd0iy31mxkcp47xk3n5f5d175-emacs-hide-comnt-2019.11 >>> rx@dell ~$ >>> rx@dell ~$ guix install $(guix build -f emacs-hide-comnt.scm) >>> The following package will be upgraded: >>> emacs-hide-comnt (dependencies or package changed) >>> >>> nothing to be done >>> rx@dell ~$ >>> --8<---------------cut here---------------end--------------->8--- >>> >>> >>> >>> Hm??? >>> >>> One difference that I see: my emacs-hide-comnt.scm has >>> a last line of >>> >>> --8<---------------cut here---------------start------------->8--- >>> emacs-hide-comnt >>> --8<---------------cut here---------------end--------------->8--- >>> >>> and I need that for building the package by hand - If I remove >>> that line (the corresponding packages: emacs-dump.scm, urweb.scm >>> don't have such last lines): then I cannot build my package by hand >>> any more - and worse: I still cannot pull from my channel2 ?? >>> >>> Thanks in advance.
