Not sure if this should go here or the Burning Man Hexayurt Materials thread...but here goes...
I just did a ton of research on hexacomb cardboard and its availability in so cal. Very long story short, the sales guys at Pregis (the makers of hexacomb) are just about the most helpful and friendly people you'll ever meet. I talked to 3 different people, the last one being the head of the division who offered to help burners acquire this stuff in any way possible. They have distributors all over the world that can sell smaller quantities (thereby avoiding the need to buy a couple pallets)...including one here in my home town of Santa Barbara, CA. This is the contact info (posted with his permission): Bill Wetzbarter [email protected] 336-508-9823 Tharco is one such distributor, and they have locations in Santa Fe Springs, CA (562) 944-6121 and San Lorenzo, CA (510) 276-8600. They quoted me $12.70 per 48x96 sheet...not bad! Hope this is helpful. Anyone else out there looking to build a hexacomb hexayurt (how poetic) at BM this year? I'd love to connect with you. On Jun 16, 3:59 pm, Blue Fire <[email protected]> wrote: > Regular cardboard stacked and bound, say six sheets thick, would be > strong and light. > > How important is the integrity of the 4x8 piece? A single 4x8 would > be stronger than two 4x4's joined, wouldn't it? > > On May 11, 2009, at 7:42 AM, RichShumaker wrote: > > I am asking if anyone knows of cheap cardboard in 4 X 8 sheets. I may > have to buy smaller and use lots more tape. 4' X 4' would work too if > it was cheap enough. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hexayurt?hl=en -~----------~----~----~----~------~----~------~--~---
