great question chris!

On Tue, Jan 26, 2010 at 1:54 PM, Chris Phoenix <[email protected]> wrote:

> Tape adds a lot to the cost and skill of hexayurt building. I'm
> wondering whether there might be more mechanical joints that could
> work.
>
> For example, truss joint connectors - those little metal plates with
> spikes stamped out of them - might be pre-bent to the correct angles
> and used to attach the panels together. Although putting them into
> wood requires a hydraulic press, they should go pretty easily into
> foam. A bolt through them to a large washer or plate on the other side
> should hold them in place.
>
> The resulting joints would not be water-tight, but just a little tape
> should be able to fix that.
>
> I think I remember reading that an important part of hexayurt strength
> is the tension in the tape that's wrapped around between the walls and
> roof. If so, it might be necessary to add a cable or strap, either
> wrapped around the outside, or run through the bolts (eyebolts?)
> attaching the truss connectors.
>
> Has anyone tried anything like this? Can anyone see a major problem?
>
> Chris
>
> --
> Chris Phoenix
> [email protected]
> 650-776-5195
>
> Executive Coach
> Director of Research, Center for Responsible Nanotechnology,
> http://CRNano.org <http://crnano.org/>
>
> --
> You received this message because you are subscribed to the Google Groups
> "hexayurt" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected]<hexayurt%[email protected]>
> .
> For more options, visit this group at
> http://groups.google.com/group/hexayurt?hl=en.
>
>


-- 
May you love, may you be loved, may love enfold surrounding you, may love
penetrate resistance of living life and may this love spread like fire
everywhere!

MOC~775.848.8609
Bridgette Lyn Dolgoff
[email protected]
    775.624.7862

-- 
You received this message because you are subscribed to the Google Groups 
"hexayurt" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/hexayurt?hl=en.

Reply via email to