Hi Bill, I am glad you found the tape to look as promising as I did. So far I am very happy with the results, it is holding very well and doesn't seem to peel back at all. I did peel one piece off and it came right off without tearing the paper. So it seems to come off clean, not sure after it has been baked on for a week.
On Jun 7, 7:06 pm, "Bill Wiltschko" <[email protected]> wrote: > I just received some Scala 627 tape I ordered, after seeing it mentioned in > a post here. It's interesting stuff for two reasons. 1) it has great sheer > resistance without bi-filament threads, and 2) it has an acrylic adhesive > rather than 3M's 8959's synthetic rubber adhesive. This interests me > because my hexayurt panels don't stick to bi-filament tape after four trips > to the playa. I know I'll have to find a way to remove the adhesive before > this year's BM, but using an acrylic or silicone adhesive may solve the > long-term problem. I'll use bi-filament and the Scala 627 just to > experiment this year, and maybe some JVCC PPT-25C Polyester Circuit Plating > Tape (silicone adhesive) too. > > Does anyone have high heat AND high stress experience with acrylic or > silicone adhesives? > > Bill Wiltschko -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/hexayurt?hl=en.
