gonna require an auger. 

3.5 sledge works just dandy on U rebar.


On Aug 14, 2013, at 9:54 AM, Jeremy Shaw wrote:

> I have serious doubts about your ability to get those into the ground at all. 
> I had to use a very large sledgehammer to get straight stakes into the 
> ground. 
> 
> - jeremy
> 
> 
> On Wed, Aug 14, 2013 at 10:29 AM, Ben Friedland <[email protected]> wrote:
> I just grabbed four of these anchors: 
> 
> http://www.homedepot.com/p/Vortex-16-in-Steel-Spiral-Folding-Ring-Anchor-ANCFR16-ORG-A/202703690#.UguhS6vXgqs
> 
> They weigh about 1.7 lbs each and I have no doubt they're very durable. 
> They're probably much stronger than your average rebar. My only concern is 
> the depth. They're only 16". Do you think that will sufficiently anchor in 
> the Playa ground enough to tie down a 10' H15 Hexayurt? 
> 
> Thanks!
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "hexayurt" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/hexayurt.
> For more options, visit https://groups.google.com/groups/opt_out.
>  
>  
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "hexayurt" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/hexayurt.
> For more options, visit https://groups.google.com/groups/opt_out.
>  
>  

-- 
You received this message because you are subscribed to the Google Groups 
"hexayurt" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/hexayurt.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to