To bend cold 1/2" rebar you need about 3' leverage (a lot less for 3/8"
rebar), so just buy two 3' water pipes and a pair of thick gloves. Duct
tape helps mark the spot on rebar where the corner would be.

Good luck!

Vladimir


On Wed, Aug 14, 2013 at 11:52 AM, <[email protected]> wrote:

> I leave mine straight and cap them with tennis balls (visit your local
> tennis club and ask if they have any "spent" balls).
>
> I've bent 100 too but don't think it's really worth the gas or time.
>
> One guy's opinion,
> Joshua
>
> On Aug 14, 2013, at 11:31, Ben Friedland <[email protected]> wrote:
>
> Yea the reason I went with this is because I couldn't find pre-bent
> rebars, and don't currently have access to a device which can heat them to
> bend them. I figured this was a simple solution. But maybe not. Is there
> any way to bend the rebar into the U-shapes without requiring
> any specialized equipment?
>
> On Wednesday, August 14, 2013 10:50:29 AM UTC-7, )(hoenix wrote:
>>
>> gonna require an auger.
>>
>> 3.5 sledge works just dandy on U rebar.
>>
>>
>> On Aug 14, 2013, at 9:54 AM, Jeremy Shaw wrote:
>>
>> I have serious doubts about your ability to get those into the ground at
>> all. I had to use a very large sledgehammer to get straight stakes into the
>> ground.
>>
>> - jeremy
>>
>>
>> On Wed, Aug 14, 2013 at 10:29 AM, Ben Friedland <[email protected]> wrote:
>>
>>> I just grabbed four of these anchors:
>>>
>>> http://www.homedepot.com/p/**Vortex-16-in-Steel-Spiral-**
>>> Folding-Ring-Anchor-ANCFR16-**ORG-A/202703690#.UguhS6vXgqs<http://www.homedepot.com/p/Vortex-16-in-Steel-Spiral-Folding-Ring-Anchor-ANCFR16-ORG-A/202703690#.UguhS6vXgqs>
>>>
>>> They weigh about 1.7 lbs each and I have no doubt they're very durable.
>>> They're probably much stronger than your average rebar. My only concern is
>>> the depth. They're only 16". Do you think that will sufficiently anchor in
>>> the Playa ground enough to tie down a 10' H15 Hexayurt?
>>>
>>> Thanks!
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hexayurt" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to hexayurt+u...@**googlegroups.com.
>>> To post to this group, send email to [email protected].
>>> Visit this group at 
>>> http://groups.google.com/**group/hexayurt<http://groups.google.com/group/hexayurt>
>>> .
>>> For more options, visit 
>>> https://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out>
>>> .
>>>
>>>
>>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hexayurt" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to hexayurt+u...@**googlegroups.com.
>> To post to this group, send email to [email protected].
>> Visit this group at 
>> http://groups.google.com/**group/hexayurt<http://groups.google.com/group/hexayurt>
>> .
>> For more options, visit 
>> https://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out>
>> .
>>
>>
>>
>>
>>  --
> You received this message because you are subscribed to the Google Groups
> "hexayurt" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/hexayurt.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>
>  --
> You received this message because you are subscribed to the Google Groups
> "hexayurt" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/hexayurt.
> For more options, visit https://groups.google.com/groups/opt_out.
>

-- 
You received this message because you are subscribed to the Google Groups 
"hexayurt" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/hexayurt.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to