We do 3" alum foil first, then for sides that touch the ground we glue in a 1" thick cushion foam strip for dust isolation, and then cover it with a 10" cordura strip. 1000D is tougher, but 500D is (a lot) easier to glue :)
On Mon, Apr 14, 2014 at 11:21 PM, Rob Gordon <[email protected]>wrote: > I'm still trying to source items I need and building models to do test > runs. > > Has anyone tried something like Flex Seal, Epoxy or other type of spray or > paste on substances to seal the edges of the boards? > > How about the same stuff your using for the cordura fabric? Scotch-Weld™ > Neoprene High Performance Contact Adhesive 1357? or paste the cordura along > the edges? > > Any thoughts? > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
