I feel that alum foil helps to stiffen sharp corners (several layers meet there nicely) and to cover various board defects, also it seals in polyiso fibers that could give you an itch - 1000D cordura has a pretty loose weave... but it's probably not required.
On Thu, Apr 17, 2014 at 11:15 PM, Rob Gordon <[email protected]>wrote: > Could the cordura strip stand alone? > > > On Tuesday, April 15, 2014 1:44:56 AM UTC-5, Vladimir Khodel wrote: > >> We do 3" alum foil first, then for sides that touch the ground we glue in >> a 1" thick cushion foam strip for dust isolation, and then cover it with a >> 10" cordura strip. 1000D is tougher, but 500D is (a lot) easier to glue :) >> >> >> On Mon, Apr 14, 2014 at 11:21 PM, Rob Gordon <[email protected]> wrote: >> >>> I'm still trying to source items I need and building models to do test >>> runs. >>> >>> Has anyone tried something like Flex Seal, Epoxy or other type of spray >>> or paste on substances to seal the edges of the boards? >>> >>> How about the same stuff your using for the cordura fabric? Scotch-Weld™ >>> Neoprene High Performance Contact Adhesive 1357? or paste the cordura along >>> the edges? >>> >>> Any thoughts? >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "hexayurt" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> >>> Visit this group at http://groups.google.com/group/hexayurt. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
