You're gonna have polyiso bits all over the place. Have you a couple shop vacs, one for above & the other below your cuts? Would help a lot!
Sharp kitchen knives create less moop. Use a guide to achieve your angle. Hope this helps. On Jul 30, 2014, at 11:19 AM, Alex Gorbatchev <[email protected]> wrote: > Hey Friends! > > I'm trying to find some information related to polyiso panel cutting safety. > I'm about to start slicing my panels using a jig saw and I can only do that > indoors in my living room. > > A friend suggested that I find some kind of safety information regarding > that, possibility of particle spreading and such. > > Does anyone have any thoughts on the subject? What are the preferred ways to > cut the panels? > > Thank you!! > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
