Yes. In retrospect -- that would have been much faster. I also now own a nice circular saw.
My long term plan is to build a CNC mill large enough to handle 4x8 sheets ;) - jeremy On Fri, Aug 1, 2014 at 11:45 AM, <[email protected]> wrote: > I admire your creativity in solving that problem. > > I got a $40 jigsaw from home depot with an adjustable angle. I set it at > the edge of the board I was cutting, then duct taped a ~10' long straight > board in place as a guide. > > http://www.chaosreigns.com/gallery/20140720_190130.jpg.html > > On 08/01, Jeremy Shaw wrote: >> Hello, >> >> I beveled all the edges on hexayurt by hand. I made a video about it: >> >> https://www.youtube.com/watch?v=X8HFAIa-FQA >> >> I am sure there is a lot of room for improvement. Like.. not using a >> serrated edge and creating an ungodly amount of MOOP. >> >> - jeremy >> >> -- >> You received this message because you are subscribed to the Google Groups >> "hexayurt" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/hexayurt. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
