Title: Re: [HG] Hackmans?
Hi,
I would wrap a piece of 400 grit wet & dry abrasive round a 1" square block of wood ( mdf is great ) place it flat on the rim and spin the wheel a few times. Change the abrasive to present a fresh face and repeat. You should continue until the "drag" on the wheel is even. Finally, do the same but rotate the wheel backwards a few times to polish off any wood fibres that remain . Then a  good spin forwards pressing a piece of linen on the rim and you are good to go. It's not a bad idea to do this routine as a general maintenance procedure as it removes old rosin build up. Cliff Stapleton does it before each cotton change.
 
Incidentally, Scott Marshall in Lancaster UK has started a Hurdy-gurdy Forum which is in no way a competitor of this list, merely a forum with an emphasis on the hurdy-gurdy and its events this side of the pond.
 
 
Regards to all
 
Neil
----- Original Message -----
Sent: Saturday, June 03, 2006 7:38 AM
Subject: RE: [HG] Cleaning your wheel

Hi everyone,

 

What’s the best way to clean up a gurdy wheel? By this I mean one which has been touched by dirty hands, not an over rosined one.

 

Many thanks

 

Jacqueline

 


From: owner-[email protected] [mailto:owner-[email protected]] On Behalf Of Christina Wright
Sent: 02 June 2006 21:23
To: [email protected]
Subject: Re: [HG] Hackmans?

 

Dear Jocelyn,
    Alden and Cali Hackman are well and working hard in Indianola.  I spent time with them this weekend at Folklife and we played up a storm.  

    If you have their phone number, give them a call.  If not, contact me off list and I’ll help.

Yours,
Chris Wright


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/354 - Release Date: 01/06/2006


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/354 - Release Date: 01/06/2006


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.0/353 - Release Date: 31/05/2006

Reply via email to