Hello Neil, 
 
Gave your advice a quick go at lunchtime and got a dramatic improvement -
thanks!  I think my mistake was believing that liquid rosin (which I
normally use) clears the wheel of the old rosin layer as well as applying a
new layer. Clearly that was not the case.  
 
Are there any users of liquid rosin out there who can share
advice/experience on this? 
 
Also, I'm running short of liquid rosin and need to make some more up.  Can
anyone supply a recipe?
 
Mike

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 12 April 2007 10:51
To: [EMAIL PROTECTED]
Subject: Re: [HG] Quick translation of the text on Simon's homepage


Hi Mike
 
Sounds like you have an accumulation of old rosin & general crud on your
wheel.
 
 Normal playing is constantly smoothing the rosin layer and putting a polish
on it in one direction- imagine stroking a hedgehog. When you turn the wheel
the other way, the string is being bowed against the direction of polish and
so gives a stronger friction.
 
I suggest you get out the fine ( 400 grit) wet and dry abrasive, wrap it
tightly round a flat block of wood and press it against the rapidly turning
wheel. Change the face of the abrasive regularly and continue until there is
no shiny spot on the paper.
 
 You will now have removed all the accumulated crud and can lightly add
rosin.
 
Incidentally, Cliff Stapleton told me years ago that does this routine
before each cotton renewal.
 
Good luck
  
Neil 
 
  http://www.hurdy-gurdy.org.uk <http://www.hurdy-gurdy.org.uk> 
 
http://www.myspace.com/neilbrook <http://www.myspace.com/neilbrook> 
 
 

----- Original Message ----- 
From: Eaton Mike <mailto:[EMAIL PROTECTED]>  
To: '[EMAIL PROTECTED]' <mailto:'[EMAIL PROTECTED]'>  
Sent: Thursday, April 12, 2007 10:16 AM
Subject: RE: [HG] Quick translation of the text on Simon's homepage

All, 
 
Now here's an interesting thing.  My low D chanter has been squealing at me
for a couple of weeks  - jumping into harmonics.  I've tried all the usual
tricks:  shimming the string to reduce the pressure, replacing the cotton,
applying rosin to the string before replacing the cotton, taking the rosin
off the wheel and replacing it afresh, changing the string for a brand new
one ... nothing has worked.  
 
And yet, if I turn the handle backwards, it plays as sweet as can be.
 
What's going on here  - can anyone offer an explanation for this?
 
Mike


This email, including any attachment, is a confidential communication
intended solely for the use of the individual or entity to whom it is
addressed. It contains information which is private and may be proprietary
or covered by legal professional privilege.


If you have received this email in error, please notify either the sender or
telephone ++ 44 (0) 1963 370551 upon receipt, and immediately delete it from
your system. Anything contained in this email that is not connected with the
businesses of Thales Naval is neither endorsed by nor is the liability of
this company.


Whilst we have taken reasonable precautions to ensure that any attachment to
this email has been swept for viruses, we cannot accept liability for any
damage sustained as a result of software viruses, and would advise that you
carry out your own virus checks before opening any attachment.




   _____  




No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.2.0/757 - Release Date: 11/04/2007
17:14



This email, including any attachment, is a confidential communication
intended solely for the use of the individual or entity to whom it is
addressed. It contains information which is private and may be proprietary
or covered by legal professional privilege.

If you have received this email in error, please notify either the sender or
telephone ++ 44 (0) 1963 370551  upon receipt, and immediately delete it
from your system. Anything contained in this email that is not connected
with the businesses of Thales Naval is neither endorsed by nor is the
liability of this company.

Whilst we have taken reasonable precautions to ensure that any attachment to
this email has been swept for viruses, we cannot accept liability for any
damage sustained as a result of software viruses, and would advise that you
carry out your own virus checks before opening any attachment.

Reply via email to