Yep, Ook is so right. Those DLink instructions are crap. Just for shits-n-grins I gave it a try. No change! I even disabled the virtual server settings and used the firewall settings and went up to 27016 (since 27015 works just fine, before and after). No CHANGE!
This is getting really old! "DO WHAT I WANT, NOT WHAT YOU THINK YOU SHOULD DO!" <Deep Cleansing Breath> OK... any other suggestions? Uncanny -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of OoksServer Sent: Tuesday, January 04, 2005 3:53 PM To: [email protected] Subject: Re: [hlds] Port changed when server starts The website is wrong. Whoever wrote that information was just plagiarizing what they found somewhere else. You do NOT need to open 27030-27039 (TCP). If you do, nothing will use them because those are ports on Steams end, not your end. Opening these accomplishes nothing. You do NOT need to open 27000-27015 (UDP). Just open the port you want your server on. You optionally need the steam friends port, but I don't remember if that is 1200 (UDP) or not. Nor do I remember if port 1200 is a port on the server or a port on Steam. I do know that you do not need port 1200 to get your server working. You know what is really funny, one of the routers out there, Westell I think, or maybe Netgear, has a pre-defined Half-Life server port forward setting, but it uses port 27015 TCP, not UDP. It's hilarious that they actually include that as a preset port forwarding, when it's obvious they never actually tested it. ----- Original Message ----- From: "Edson Sossai" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, January 04, 2005 12:50 PM Subject: Re: [hlds] Port changed when server starts > Well i just followed what the D-Link support page said to do in order to get CS working behind the rounter. > You can check it here -> http://support.dlink.com/faq/view.asp?prod_id=1406#604 > Maybe i don't really need all those. > > -----Original Message----- > From: m0gely <[EMAIL PROTECTED]> > Sent: Jan 4, 2005 8:58 AM > To: [email protected] > Subject: Re: [hlds] Port changed when server starts > > Edson Sossai wrote: > > > No. That wasn't me. > > My router is a D-link DI-614+ with the following ports forwarded: > > 1200 (UDP) > > 27000-27015 (UDP) > > 27030-27039 (TCP) > > You only need the port forwarded the game runs on. ex: 27015 UDP. > Unless you're filtering outbound ports as well. > > -- > - m0gely > http://quake2.telestream.com/ > Q2 | Q3A | Counter-strike > > _______________________________________________ > To unsubscribe, edit your list preferences, or view the list archives, please visit: > http://list.valvesoftware.com/mailman/listinfo/hlds > > > _______________________________________________ > To unsubscribe, edit your list preferences, or view the list archives, please visit: > http://list.valvesoftware.com/mailman/listinfo/hlds > _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds
