WOW! Most of this subject is Greek to me with what has been stated from
everyone. I only have a problem with my server being shown on the list after
a power failure or have to shut down my entire network, but, never have a
problem fixing it.
My setup: SURFboard4200 modem, D-Link DGL-4300 gaming router.
Computers: Mine, Hers, and the server. (CS 1.6)
When it doesn't show, I just go into the routers advanced settings under
gaming and put in the servers new LAN IP. (the LAN IP's change when there's
a total network shut-down) Of course all my ports are already there, and
that's it. Once the router is rebooted it shows up.
PORTS: TCP: 5273, 7002, 27020 - 27040
UDP: 1200, 1300, 27000 - 27015
I don't know if this will help you, but, this is my first post in here.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ook
Sent: Wednesday, August 10, 2005 1:12 AM
To: [email protected]
Subject: Re: [hlds] Server isn't being shown on master list?
No, you misunderstand what I'm saying. Put modem in bridge mode. Run cat5
from modem to WRT54G (or equivalent). Setup WRT54G for PPPOE/A, or whatever
your ISP requires, including your userid/password. The Zoom modem in bridge
mode for all practical purposes becomes invisible. The WRT54G wan IP is the
ip your ISP assigns you. It becomes your router, it has the dhcp server in
it. All other devices on network work as they always have. It is as if you
were using that as your modem. Use it's built in 4 port switch, or run cat5
to another hub/switch/wap, etc. It also has builtin wirelessb/g.
The above scenario assumes your ISP supports running your modem in gateway
mode, your modem actually does this, and you have a router of some sort that
can handle the pppoe/a/etc from your ISP. Mine does, this is what I do, and
it works very well.
In the above example, bridge mode turns control of the network over to the
WRT54G, which has a router and 4 port switch and dhcp server built in. This
is a good thing.
_______________________________________________
To unsubscribe, edit your list preferences, or view the list archives, please
visit:
http://list.valvesoftware.com/mailman/listinfo/hlds
