The only port I forward is 27015, and my server is on the steam list
just fine. I run three servers on the same box, and you simply use the
-port 27015 on the command line. Or -port 27016, etc. BTW, you should
open 27015, not 27500, as that is the default port hlds uses.
example, I start my op4 servers like this
D:\HLserver\GearBoxPrivateBeach\hlds.exe -game gearbox -console
d:\HLserver\GearBoxAllMaps\hlds.exe -game gearbox -console -port 27016
The first one defaults to port 27015, so I don't need a -port on the
command line.
There are other ports, but I don't bother to open them - just the one
port works good enough.
On 1/27/2011 2:55 PM, klr 8210 wrote:
Hi
I put up my SRCDS server behind my firewall. The server is on port
27500. I opened up TCP/UDP 27500 in the firewall. People are able to
connect to my server, but only via the console.. connect ip:port. If
they add it to their favorites it seems STEAM can't connect to the
server. Do I need to open anything extra in my firewall?
If there are additional ports that needs to be opened, can I customize
those ports to each server? Say I have two physical machines each
running one game server, but only one public IP.. So I NAT the ext
ip:27500 to int.ip 1:27500 and ext ip:27600 to int. ip2:27600.. Can I
put a param in my startup line to dictate these ports to each game
server, so my NAT would work (as I obviously can't nat one ext ip:port
to two int ip:ports)..
Thanks
klr
_______________________________________________
To unsubscribe, edit your list preferences, or view the list archives, please
visit:
http://list.valvesoftware.com/mailman/listinfo/hlds
_______________________________________________
To unsubscribe, edit your list preferences, or view the list archives, please
visit:
http://list.valvesoftware.com/mailman/listinfo/hlds
