This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
Here I'm back with my choke problems.
I think, that the problem for my server choks ir network config. 4 example this
is my server's config:
----------------------------------------------------------------------------------------------------------------------------------------------------
eth0 Link encap:Ethernet HWaddr 00:50:22:D3:90:16
inet addr:85.255.48.47 Bcast:85.255.49.255 Mask:255.255.254.0
inet6 addr: fe80::250:22ff:fed3:9016/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:564133837 errors:0 dropped:0 overruns:0 frame:0
TX packets:309618563 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2771356202 (2642.9 Mb) TX bytes:1532409613 (1461.4 Mb)
Interrupt:18 Base address:0xe000
And this is my config (home):
Ethernet adapter Kauno Interneto Sistemos:
Connection-specific DNS Suffix . : kis.lt
Description . . . . . . . . . . . : Marvell Yukon Gigabit Ethernet 10/10
0/1000Base-T Adapter, Copper RJ-45
Physical Address. . . . . . . . . : 00-50-22-D3-65-0D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 85.255.48.24
Subnet Mask . . . . . . . . . . . : 255.255.254.0
IP Address. . . . . . . . . . . . : fe80::250:22ff:fed3:650d%4
Default Gateway . . . . . . . . . : 85.255.49.254
DHCP Server . . . . . . . . . . . : 85.255.49.254
DNS Servers . . . . . . . . . . . : 193.189.87.6
212.59.0.1
fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
Lease Obtained. . . . . . . . . . : 2006 m. vasario 22 d. 20:46:03
Lease Expires . . . . . . . . . . : 2006 m. vasario 23 d. 08:46:03
----------------------------------------------------------------------------------------------------------------------------------------------------
So, we are on some kind of lan, but these IPs are real and we don't share one
IP. So, this mean that we are not on lan, only usin the same provider. So, when
I play on that server, I don't get any choke or loss, but when people play from
other networks, they say, that they get choke up to 90, 60.... I've done lots
of things. changed rates, software bus the problem still exists. Is there a
way, that the problem is on the provider side? It will sound terrible, but i've
even tryed edited engine files (those ones, that run server on internet and
accept players when you start server SV_LAN 1 mode). and you know what? When I
run server lan 1 the choke problem disappeare.
Any ideas, why server in sv_lan 0 make people choke? What's the difference
between server LAN 1 and LAN 0?
--
_______________________________________________
To unsubscribe, edit your list preferences, or view the list archives, please
visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
