I can't comment much on the Paxman and Merker horns as I have only cursory knowledge of them. I've tried several Merkermatics and found them to be nice playing instruments, especially at the price. The Paxmans lived up to their reputation as well and has added another model to their already popular offerings. I really know nothing of the design particulars except that the F branches are made of a different diameter tubing than the rest of the cylindrical sections, so I'll keep it at that. The current Lawson models have multiple bores depending on the model. The valve set and slides on the 804 Fourier and Classical models are .470. The V2 lead-pipe on those horns has a very thin, tapered sleeve soldered about a third of the way through. I won't tell you how we do that or the precise location. Its purpose is to add a second venturi in order to speed up the air which results in faster response especially in the upper register. Our mouthpieces are designed to do that as well. The F branch tubing is .474 to help match the two sides. The B branch is .472 on the Classical and .474 on the Fourier. We can vary these parts depending on what the customer wants: i.e. one side tighter or looser as well as changing the lead-pipe to favor either side if they don't want the V2. The bell tail and 1st branch tapers on each model are different as well which affects response. Intonation is the same on both models as the tapers are such to balance that out. We ball out all tuning slides to make sure there are no highs and lows left after bending. Tight or wide spots in the valve slides can affect intonation on certain notes if they occur at a nodal point. On the 8211 descant, there are different tapers on each side. There are tapers through the ports of the change valves as to eliminate straight sections in the lead-pipes and first branches which are different tapers on each side. The 963 descant is multi bored in a similar way to the Classical 804 but the places and proportions are different. The change valve has straight ports so the lead-pipe and 1st branch are common. The B side is pretty much the same as on the 804 and the FF side has a bigger section in it to make them match better in response. 1,2,3 and A/stop valve sets and slides on both descants are .470. Low F extension tubing is .474 if the horn is so equipped unless the owner wants otherwise. We are the only manufacturer to do a valve job on a new horn. This gets the clearance between the rotor and casing with a 6A lap to .0002" and the bearings to .00012" with a 7A lap. The nickel plating holds up with proper maintenance (regular oiling, annual cleaning, heavy oiling when stored) for at least 25 years of daily use. If they do wear to the point of leaking, they can be rebuilt in the traditional way by a competent "valve guy." Tight valves are essential for optimum response and intonation with our acoustic systems.
Dual boring affects mainly the response/efficiency of the system, not the intonation, unless you open or close a critical nodal point or place a straight section where there should be a taper. It is all very tricky. Walter and Bruce spent 50 or so years developing this. We are very careful in every stage of manufacture to make parts exactly to spec and to fit and assemble them cleanly so there are no solder blobs on the inside. All horns are play and computer tested before they go out to the customer. I'm endeavoring now to design a full triple horn. It will be the 8211 descant with a Fourier F side added and have separate tuning and tapers on all three sides. There will be no straight sections where there should be tapers. Engineering it to weigh less than a Honda (snow blower, I'm positive it will weigh less than the car) is the real challenge. We are experimenting with some new light weight materials for the rotors and casings. I won't have a playing prototype any time soon. You'll know about it when I do! I'm also working on expanding our bell flare line. I should have some new offerings there early next year. It's mainly controlling the weight/thickness during finishing to make them more consistent from run to run. I've also found that varying the thickness towards the rim where we pattern anneal them makes for more acute differences in sound and response than we previously thought. I'm doing more research and testing to figure the optimal dimensions. My other new project at hand is developing new mellophone mouthpieces, in collaboration with John Stork, to enable the student "doublers" to survive marching season with their chops in some sort of order as to horn playing. My students at UNH who march have been using the prototypes and the reaction has been very positive. From my standpoint, their lessons this fall have gone better than a year ago. Basically, it's the old #4 mellophone cup with threads on it to accept the player's horn screw rim. It's bent at an angle at the backbore to allow the player to play at their "horn angle" while keeping the bell of the 'phone up where the directors want to see it. If I'd had this combo back when I was marching (with upright alto way back in the last century), I might have even enjoyed it! If I get time, I might do some acoustical testing, but hey, it's still a mellophone. Hopefully, I'll have stock next year. The biggest job right now is moving the shop. Not as far as the last time but it's still a task at hand. Our lease is up at the end of the year and I was looking for a larger space to rent. I found that and the owner offered to sell it at a very good price. So, we'll be 5 miles up the road in Littleton, NH by Clamsaa! We'll have plenty of shop space, a real show/testing room and real (clean!) office space. I'll also have plenty of room to store my ever expanding KBHC music library and snow/summer tires depending on the season. It's got a yard out back right by the Ammonoosuc River and I'm thinking of opening a barbeque joint next summer. Seriously! These Yankees know their seafood but the barbeque around here just ain't real! Best wishes to all for a Happy and Safe Holiday Season!!! KB PS: Somebody asked about Clamsaa. Yes, there is a Clamsaa! It's a truly universal holiday as it never really ends. It does pick up about now, though, especially during Nutcracker runs and brass quintet concerts at malls and hockey games. I'm sure The Professor will have a new "Clamthem" for this year. I have not had much contact with him of late, thank goodness, as he has been busy developing a new triple belled horn with two built in mutes. This one has a back bell, a front bell and a 360 degree swivel bell controlled by a servo motor on a foot pedal. The "Omnitrichter," as he calls it, also has an electric fan mounted on it with a second foot control for the speed. It makes any kind of vibrato you might want. One mute sounds like the loudest stopped horn imaginable and the other one is just out of tune. It's a nine valve single B, to lighten the weight, but it still will come in about the same as a Honda lawnmower, from what I figure. He's really jealous of my work but we keep the competition on a somewhat friendly, almost semi-professional level. I also don't worry because I have a computer and he only has a slide rule. He's been back in court, as usual, but not jail. He won his appeal on his conviction for transporting a concealed mellophone across state lines without a permit. The prosecutors were really mad about that! Luckily, The Professor had engaged the prestigious Boston Legal firm of Dewey, Cheatum and Howe, and they really did the job! And also, they only charged him their non profit organization rate after seeing his books! He's going to need them again, though. I got word this week through the local grapevine, that the prosecutors are setting another trap. They want to get him for some new crimes: "Note Evasion," a felony, and/or "Intonation Laundering," which is just a misdemeanor. Geesh, you'd think he was Al Capone or a politician or something! Apparently, there's a section in the new health care legislation somewhere in its 2100 pages, that sneaks in statutes on these. The argument is that people who hear The Professor play need medical care as a result. Why, I even heard that some guy from Philly or Minneapolis or Jersey or somewhere peed in his pants so hard during the Lexicon of Clamology in Denver that he ended up with a catheter! The statute was apparently added by Rep. Max Hindenburg, (I-NJ) who went to law school with the prosecutor up here and remembers The Professor from his Exit 2 days. Also, he's being sued by his neighbors over there in Bad Corner because the new cracking tower at the valve oil factory blocks their view of Mt. Washington. The cancer rate in the town has gone up also since The Professor moved in but they haven't put the blame on him for that, yet, even though cancer of the cochlea was unheard of until now. Some people are just born to "stay in trouble!" Glad I'm not one of them! William wrote: << I picked up a 1975 Paxman 25A last week because I was fond of the horn after I tried it out a few months ago. When I was doing a closer inspection of the Horn I took a closer look at the dual bore system - or at least as well as my eyes could tell since I was curious about the concept. It's only been a week and comparing it to my other horn (single bore Schmid) and other horns I've played on. I'm slowly getting used to it and I like the idea and I like the horn. It'll never replace my Schmid, but it's a fun horn to play on and I like it a lot. However, I wonder if it's been used on any other Horn or if it's been patented so it can't be. It seems like a neat idea and has been used on trombones a lot. But Paxman is the only maker I know of that does this. Is there any reason why? Is it just not that popular? Is it difficult to manufacture? >> Dan responded: << Holton Merkers (at least some models) are dual .468/.460 bore. >> Paul added: << Lawson horns are dual bore - although they go in the reverse direction that Paxman does. On a Paxman, the F side is quite a bit larger than the B side, whereas on a Lawson, it is the B side that is a little smaller. >> _______________________________________________ post: [email protected] unsubscribe or set options at https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org
