Dear Kendall,

thanks for the interesting and informative report.

I've been playing on a Dieter Otto triple since March of 1998. If you 
have any questions you'd like to put with regard to the model you are 
developing, I'd be more than happy to give you any support I can. I have 
found interesting solutions to the weight issue and condense water.

Best wishes
Andrew Joy
www.andrewjoy.com
> I can't comment much on the Paxman and Merker horns as I have only cursory  
> knowledge of them.  I've tried several Merkermatics and found them to be  
> nice playing instruments, especially at the price.  The Paxmans lived up to  
> their reputation as well and has added another model to their already 
> popular  offerings.  I really know nothing of the design particulars except 
> that  
> the F branches are made of a different diameter tubing than the rest  of the 
> cylindrical sections, so I'll keep it at that.
>  
> The current Lawson models have multiple bores depending on the model.   The 
> valve set and slides on the 804 Fourier and Classical models are .470.   
> The V2 lead-pipe on those horns has a very thin, tapered sleeve soldered 
> about 
> a  third of the way through.  I won't tell you how we do that or the 
> precise  location.  Its purpose is to add a second venturi in order  to speed 
> up 
> the air which results in faster response especially in the  upper register.  
> Our mouthpieces are designed to do that as  well.   The F branch tubing is 
> .474 to help match the two sides.   The B branch is .472 on the Classical and 
> .474 on the Fourier.  We can  vary these parts depending on what the 
> customer wants: i.e. one side tighter or  looser as well as changing the 
> lead-pipe 
> to favor either side if they don't want  the V2.  The bell tail and 1st 
> branch tapers on each model are  different as well which affects response.  
> Intonation is the same on both  models as the tapers are such to balance that 
> out.  We ball out all tuning  slides to make sure there are no highs and lows 
> left after bending.  Tight  or wide spots in the valve slides can affect 
> intonation on certain notes if they  occur at a nodal point.  
>  
> On the 8211 descant, there are different tapers on each side.  There  are 
> tapers through the ports of the change valves as to eliminate straight  
> sections in the lead-pipes and first branches which are different tapers on  
> each 
> side.
>  
> The 963 descant is multi bored in a similar way to the Classical 804 but  
> the places and proportions are different.  The change valve has  straight 
> ports so the lead-pipe and 1st branch are common.  The B side  is pretty much 
> the same as on the 804 and the FF side has a bigger section  in it to make 
> them match better in response.
>  
> 1,2,3 and A/stop valve sets and slides on both descants are  .470.  Low F 
> extension tubing is .474 if the horn is so equipped unless the  owner wants 
> otherwise.
>  
> We are the only manufacturer to do a valve job on a new horn.  This  gets 
> the clearance between the rotor and casing with a 6A lap to .0002" and  the 
> bearings to .00012" with a 7A lap.  The nickel plating holds up  with proper 
> maintenance (regular oiling, annual cleaning, heavy oiling when  stored) for 
> at least 25 years of daily use.  If they do wear to the  point of leaking, 
> they can be rebuilt in the traditional way by a competent  "valve guy."  
> Tight valves are essential for optimum response and  intonation with our 
> acoustic systems.  
>
>
> Dual boring affects mainly the response/efficiency of the system, not  the 
> intonation, unless you open or close a critical nodal point or place a  
> straight section where there should be a taper.  It is all very  tricky.  
> Walter 
> and Bruce spent 50 or so years developing this.  We  are very careful in 
> every stage of manufacture to make parts exactly to spec and  to fit and 
> assemble them cleanly so  there are no solder blobs on the  inside.  All 
> horns 
> are play and computer tested before they go out to the  customer.  I'm 
> endeavoring now to design a full triple horn.   It  will be the 8211 descant 
> with a 
> Fourier F side added and have separate tuning  and tapers on all three 
> sides.   There will be no straight sections  where there should be tapers.  
> Engineering it to weigh less than a Honda  (snow blower, I'm positive it will 
> weigh less than the car) is the real  challenge.  We are experimenting with 
> some new light weight materials for  the rotors and casings.  I won't have a 
> playing prototype any time  soon.  You'll know about it when I do!
>  
> I'm also working on expanding our bell flare line.  I should have some  new 
> offerings there early next year.  It's mainly controlling the  
> weight/thickness during finishing to make them more consistent from run to  
> run.  I've 
> also found that varying the thickness towards the rim where  we pattern 
> anneal them makes for more acute differences in sound and  response than we 
> previously thought.  I'm doing more research and  testing to figure the 
> optimal 
> dimensions.
>  
> My other new project at hand is developing new mellophone mouthpieces, in  
> collaboration with John Stork, to enable the student "doublers" to survive  
> marching season with their chops in some sort of order as to horn playing.   
> My students at UNH who march have been using the prototypes and the  
> reaction has been very positive.  From my standpoint, their lessons this  
> fall 
> have gone better than a year ago.  Basically, it's the old #4  mellophone cup 
> with threads on it to accept the player's horn screw rim.   It's bent at an 
> angle at the backbore to allow the player to play at their  "horn angle" 
> while keeping the bell of the 'phone up where the directors want to  see it.  
> If 
> I'd had this combo back when I was marching (with upright alto  way back in 
> the last century), I might have even enjoyed it!   If I get  time, I might 
> do some acoustical testing, but hey, it's still a  mellophone.  Hopefully, 
> I'll have stock next year.
>  
> The biggest job right now is moving the shop.  Not as far as the last  time 
> but it's still a task at hand.  Our lease is up at the end of the  year and 
> I was looking for a larger space to rent.  I found that and the  owner 
> offered to sell it at a very good price.  So, we'll be 5 miles up the  road 
> in 
> Littleton, NH by Clamsaa!  We'll have plenty of shop space, a real  
> show/testing room and real (clean!) office space.  I'll also have plenty  of 
> room to 
> store my ever expanding KBHC music library and snow/summer  tires depending 
> on the season.   It's got a yard out back right by the  Ammonoosuc River and 
> I'm thinking of opening a barbeque joint next summer.   Seriously!  These 
> Yankees know their seafood but the barbeque around here  just ain't real!
>  
> Best wishes to all for a Happy and Safe Holiday Season!!!
>  
> KB
>  
> PS: Somebody asked about Clamsaa.  Yes, there is a Clamsaa!  It's  a truly 
> universal holiday as it never really ends.  It does pick up about  now, 
> though, especially during Nutcracker runs and brass quintet concerts at  
> malls 
> and hockey games.  I'm sure The Professor will have a new "Clamthem"  for 
> this year.  I have not had much contact with him of late, thank  goodness, as 
> he has been busy developing a new triple belled horn with  two built in 
> mutes.  This one has a back bell, a front bell and  a 360 degree swivel bell 
> controlled by a servo motor on a foot  pedal.  The "Omnitrichter," as he 
> calls 
> it, also has an electric fan  mounted on it with a second foot control for 
> the speed.  It makes any  kind of vibrato you might want.  One mute sounds 
> like the loudest stopped  horn imaginable and the other one is just out of 
> tune.  It's a nine  valve single B, to lighten the weight, but it still will 
> come in about the  same as a Honda lawnmower, from what I figure.  He's 
> really 
> jealous of my  work but we keep the competition on a somewhat friendly, 
> almost  semi-professional level.  I also don't worry because I have a 
> computer 
> and  he only has a slide rule.  He's been back in court, as usual, but not  
> jail.  He won his appeal on his conviction for transporting a  concealed 
> mellophone across state lines without a permit.  The prosecutors  were really 
> mad about that!  Luckily, The Professor had engaged the  prestigious Boston 
> Legal firm of Dewey, Cheatum and Howe, and they really did  the job!  And 
> also, they only charged him their non profit  organization rate after seeing 
> his 
> books!  He's going to need them  again, though.  I got word this week 
> through the local grapevine, that the  prosecutors are setting another trap.  
> They want to get him for some new  crimes: "Note Evasion," a felony, and/or 
> "Intonation Laundering," which is  just a misdemeanor.  Geesh, you'd think he 
> was Al Capone  or a politician or something!  Apparently, there's a section  
> in the new health care legislation somewhere in its 2100 pages, that sneaks  
> in statutes on these.  The argument is that people who hear The  Professor 
> play need medical care as a result.  Why, I even heard that  some guy from 
> Philly or Minneapolis or Jersey or somewhere peed  in his pants so hard 
> during the Lexicon of Clamology in Denver that  he ended up with a catheter!  
> The 
> statute was apparently added by  Rep. Max Hindenburg, (I-NJ) who went to 
> law school with the prosecutor up here  and remembers The Professor from his 
> Exit 2 days.  Also, he's being sued by  his neighbors over there in Bad 
> Corner because the new cracking tower at the  valve oil factory blocks their 
> view 
> of Mt. Washington.  The cancer rate in  the town has gone up also since The 
> Professor moved in but they haven't put  the blame on him for that, yet, 
> even though cancer of the cochlea was  unheard of until now.  Some people are 
> just born to "stay in  trouble!"  Glad I'm not one of them!
>  
> William wrote:
>
> <<  I picked up a 1975 Paxman 25A last week because I was fond of the horn  
>  
> after I tried it out a few months ago. When I was doing a closer  
> inspection of  
> the Horn I took a closer look at the dual bore system  - or at least as 
> well 
> as  my eyes could tell since I was curious  about the concept.
>
> It's only been a week and comparing it to my other  horn (single bore  
> Schmid) and other horns I've played on. I'm slowly  getting used to it and 
> I like  
> the idea and I like the horn. It'll  never replace my Schmid, but it's a 
> fun 
> horn  to play on and I like  it a lot.
>
> However, I wonder if it's been used on any other Horn or if  it's been  
> patented so it can't be. It seems like a neat idea and has  been used on  
> trombones a lot. But Paxman is the only maker I know of  that does this.
>
> Is there any reason why? Is it just not that popular?  Is it difficult to  
> manufacture? >>
> Dan responded:
>  
> << Holton Merkers (at least some models) are dual .468/.460  bore. >>
>  
> Paul added:
>  
> << Lawson horns are dual bore - although they go in the reverse  direction 
> that
> Paxman does. On a Paxman, the F side is quite a bit larger  than the B side,
> whereas on a Lawson, it is the B side that is a little  smaller.  >>
>
>
>
>
>
> _______________________________________________
> post: [email protected]
> unsubscribe or set options at 
> https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/andrew%40andrewjoy.com
>
>   

_______________________________________________
post: [email protected]
unsubscribe or set options at 
https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org

Reply via email to