I recently had a similar issue. replacing the printhead fixed it.
-bw _____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Don Connors Sent: Tuesday, January 02, 2007 8:55 AM To: [email protected]; [EMAIL PROTECTED] Subject: Re: [HPDesignJet_Printers] Cyan banding on Dj 130 Hi, Steve: Run the system info page and see if any print heads are out of date (!) - I've had numerous problems with print heads and when replacing out-of-date heads, problems often (but not always) disappear Hope this is helpful. Don On 1/1/07 11:59 PM, "Steve Moore" <[EMAIL PROTECTED]> wrote: A partial band has appeared in two places on a large print (12x26 panorama). The band is parallel to the direction of printhead travel but does not run the full length of travel. At 100% in Qimage viewer there is absolutely no corruption visible in the file. I ran the print through the processor and printed twice and the band is identical in both prints. This is why I believe it is not a printer issue. Does anyone have any ideas? Thanks, Steve Moore
