If memory serves me correct, the printer knows when its loaded from the rear that it's a roll, and that activates the cutter, if present, unless you disable it in the printing dialog. As for the roll, just having the continuous paper source available from the rear is all there is to it.
The only tip I would give is using the cutter and advance feed mechanism to trim away a couple of inches of paper before the first print task after roll paper has been loaded over night. Spring tensioned rollers leave dimples in the leading edge of the paper, that can mar a print. If you press the oval gray "OK" button when roll paper is loaded, that sends a signal to cut the paper. When you use this before a print job, the paper advances about 1/2 inch and then is trimmed. So, if you go through about 6-7 of these mini trim cycles, you trim away a couple of inches to avoid the dimple marks that often accompany leaving roll paper loaded in the printer. The alternative is to unload the roll when you are done, but it an be tricky to get roll paper loaded, so many users leave it loaded once they are "on a roll." Enjoy. Mark--- In [email protected], "akhomoutov" <[EMAIL PROTECTED]> wrote: > What kind of changes I have to do in the driver settings to get this > to work (roll paper + cutter). Do I need to install a special driver > or firmware for this? ------------------------ Yahoo! Groups Sponsor --------------------~--> Great things are happening at Yahoo! Groups. See the new email design. http://us.click.yahoo.com/lOt0.A/hOaOAA/yQLSAA/vIg0lB/TM --------------------------------------------------------------------~-> Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
