Richard Southworth wrote: > > If I've calculated correctly, a density of 1.53 is approx. equal to > L=20, which is often as dense as one can get with a matte or fine art > paper. The diffuse surface is always going to be much worse than PP > Satin. > > With pigment ink printers, using the matte ink, I've measured some > paper/ink combinations down to L=15 or so. I've never been able to get > below L=18 with my DJ90. The lowest values were obtained using the > ImagePrint RIP in CMYK mode, so that I could control the K percentage.
Yes, L=20 is about right. Being new to profiling, your other observations are what I needed to know regarding matte media and the dye ink DJs. Thank you. Tim Mimpriss Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
