Hi,
pls check the carriage belt condition, if it is worn
out pls change and problem will resolve.
regards,
uday
--- ariking2000 <[EMAIL PROTECTED]> wrote:
> we have an hp800ps printer that is almost one and a
> half year old. When
> we first get it, it was printing very accurate. For
> a 120 inch length
> of rectangular box, it is off by 0.06 inch or 0.05%
> margin. At present,
> when printing a 100 inch rectangular box, we are
> getting 0.16 to 0.26
> inch short. This is 0.16% to 0.26% margin.
>
> We have the printer calibrated and cleanned but it
> didn't help. we were
> wondering if anybody has encountered this type of
> problem before.
> Talking to HP didn't help also, because there margin
> specification is
> 0.40%.
>
> Appreciate any input we could get.
>
>
__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/
Website: http://groups.yahoo.com/group/HPDesignJet_Printers
Post message: [email protected]
Subscribe: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED]
List owner: [EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/HPDesignJet_Printers/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/HPDesignJet_Printers/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
