Hi Teddy. Your a huge help and I want to thank you for it. Super Heavy Weight Coated Media has been Calibrated in the printer Recently. (less than 2 weeks ago)
Printheads are aligned. Monitor doesnt offer settings to allow for perfect Alignment of RGB While doing Gretagmacbeth Colorimeter. Not off the charts inacurate RGB but off by a few notches. Red being over saturated and Blue and Green being under saturated. Printer never gave me accurate results. Prints have never been accurate in My short Printing Career. Ive been learning since my purchase in Feb, 2006. Printer Color Calibration is ON. I've used approximately 15-20% of the Ink across the board C,M,Y,K,LM,LC I do prints regularly so the printheads havent been a problem. And I do regular Printhead Calibration (most recently 3 weeks ago) I hate to waste money if its just something simple that Im not doing right. Justin --- In [email protected], Teddy Dako <[EMAIL PROTECTED]> wrote: > > Hi Justin, > > OK, then the issue is probably not with the Rendering Intents. > > When you have greys with a green or sometimes magenta tinge, then it's more a profile thing on the printer side than the monitor. Depending on your patience and the monitor type, you will get the bars to line up accurately, but it doesn't always happen, so I don't think that's the issue. > > One question though, did you calibrate the media in the printer? Printhead alignment, color calibration etc? The thing is, PosterJet sends contone data to the printer, meaning, the printer will use it's internal calibrations at the last stage of printing. Now, if these are off, then that could lead to some color differences in your prints. Have you printed, some time ago and the prints were fine and recently the colors started going off? If that is the case, I would do the printhead alignment and color calibration in the printer with the Super Heavyweight Media you have in the printer. > > Let us know how that turns out. > > Otherwise, you might want to check how long the printheads have been in the printer and or how much ink each has used. > > teddy > > > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
