It's not my 650c, one of my customers (I service prnters, plotters, fax, copiers besides other IT items and am a HP ASP with APS certs in Designjet and Laserjet along with Commercial PC/laptop line). I've worked a lot of them it's just the last year or two that HP is cutting needed parts supplies in a feeble attempt to make them obsolete by lack of parts. I have a 350c I recently acquired - had mouse nest and all from storage in a barn - only needed a new belt and I had that on hand.
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Adam and Laurie Sent: Monday, June 04, 2007 10:14 PM To: [email protected] Subject: RE: [HPDesignJet_Printers] In search of parts for Designjet 650c and 350C That is good to know someone who has and works on the 650C. Thanks for the info. Adam Chesterfield, VA Russ Blakeman <[EMAIL PROTECTED]> wrote: Found the part on ebay shortly after I posted this on May 19 - no further need for the part. -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Russ Blakeman Sent: Saturday, May 19, 2007 4:22 PM To: [email protected] Subject: [HPDesignJet_Printers] In search of parts for Designjet 650c and 350C Need either a drop detect sensor with cable, or the service station with the drop detect sensor and cable in it for a 36"/E carriage (should be the same for D and E carriages though) Designjet 650C. We put a new belt on, it worked a few days then the drop detect error came up (and yes it has been cleaned). Also I just picked up a Designjet 350C (C4700A E carriage) for myself that had been in storage for a while - has the optional roll feeder and the bar that is supposed to have a sliding cutter in it. The cutter and knob that slides side to side is missing - only the bar attached to the right and left covers with the 3 paper holdoffs is there. It needs a belt badly but I have that already and ordering an encoder strip as mice chewed the plastic top when it was in storage (unbelievably they didn't damage anything else!) Everything else is in good and working order so far - just need the cutter if possible. Since this is my first post in this group I ought to note that I have been working HP equipment including plotters over 20 yrs - an ASP/AWDP with APS Designjet and Laserjet certification since 2000 - computer and electronic equipment since I went active duty Air Force in 76. I retired in 95 went part time self employment and in 2000 went full time. I'm in almost the middle of Kentucky about 25 miles west of Elizabethtown, 30 SW of Ft. Knox, 25 north of Mammoth Cave NP. About the only plotters I haven't worked on yet are the 8000 thru 10000 models (I'm not paying for resident training for something I can test on later). I work on about any printer, plotter, copier or fax there is even way back to dot matrix and daisy wheel. I also have people ship their equipment for repair and return but not plotters and some of the larger lasers due to the size and ease of UPS doing the OOPS that they have been come to be associated with. I know how they work after 15 months full time as a Toshiba laptop tech for them in Louisville with the WorldPort hub there. I have had people bring machines to me or have me come to them from local all the way to Dayton OH. I've also gotten HP parts for people at reduction (sometimes) from list and had them drop shipped to the customer. Drop me an email if I can help anyone. Adam Blath INK IT ON ANYTHING .com Chesterfield, Virginia 23832 804 814-5890 Potomac PAP Yahoo Group Click to join potomac-pap ---------------------------------------------------------------------------- -- Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool.
