I purchased the cutter for my 130. It doesn't look difficult to install, but my question is, what useful things can I do with it? I don't recall seeing any "cut paper" options in the print commands, does the printer automatically cut after every print? Should I spend some time and build a roll stand for the rear of the printer? I am ordering some roll paper.. any instructions and tips will be appreciated. Steve
--- In [email protected], "mozella55" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "Phil Indeblanc" > <afterhourpwr@> wrote: > > > > This gets installed to the front of the printer I am thinking? > > > > Yep......HP even supplies the proper size TORX screwdriver for the job. > > The cutter attaches to the aluminium track you can see when you look > into the front of the printer. It a little plastic part which houses > a round knife and it sits over on the left side while you're > printing. Then when it's time to cut, the printer head travels over, > grabs the cutter, and drags it over to the right side, cutting the > paper in the process. Then the printer head and cutter travel back to > the left and the cutter is left parked there until it's needed again. > > It's the best investment you can make if you have the plain vanilla > version of the DJ-130 > > Bob > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
