Hi all, I've been having problems with poor image quality from my printer for a while. I was able to ignore the problem for a year or better by getting Lightjet prints done at the lab, but I need my printer back. In dark areas (in gamut) the print looks like an out of gamut warning in photoshop and the area goes a bright teal/gray on the print. The printer was flashing that the LC head was bad so I replaced it and at the same time upgraded to the latest firmware. I'm running a G4 mac with 10.4.10.
I have had to replace three heads so far, but half of my ink cartridges are still original. The printer has not been used in a year because of the print quality issue. I called HP tech support, but since the printer is out of warranty they want $40+tax to talk to me, even though the new print heads are still under warranty. Any help is greatly appreciated! Regards, Bill Green/William Green Photography Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
