I doubt that they can fix it as it is the mechanizm on how the paper travels. Perhaps with some newer paper that is resistant to rollers?..I doubt it. But in my opinion these roller marks some people mention are either way over emphasized, or people tend to leave them on the machine without removing the print. I have an auto cutter on my 130, and do not see any roller marks. and I am 75% of the time going over the prints inch by inch for color seperation for CYMK on a black on black print...I am 3 to4 inches away from the print...and yes I have 20/20 vision....and I dont see any roller marks on any of them, as the print doesnt rest in the feeder with the rollers against it.
Hope this at least clairifies how conserned you should be about these marks, and hope that others can chime in with their experience and explanation so you can weigh the importance. Phil ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
