You can manually advance on the Z series by just lifing the load lever and moving the media I have found.
--- In [email protected], "tomkat862" <[EMAIL PROTECTED]> wrote: > > As I posted a while ago the HP does not track the leading edge for > checking the paper loading ..it checks the position of the margins then > advances the paper about 10 inches then check the margins ( edges of > the paper right and left side) if the postion changes by more than 1/8 > inch it will reject the paper. > > Unless you know this it will drive you crazy.....make sure you "tease" > the paper to make to second position check is the same as the first. > > But now I have a question... is there a way to advance the paper say 5 > to 6 inches after uit is laoded and accepted? > > The Epson printers I use have a micro advancement button that is not to > be found on the 120. > > Also is there a pause function so you can stop printing for a few > seconds then resume? > ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
