Thanks I'll give this a try. John
--- In [email protected], "toasterboy66" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "johnmtobin" > <johnmtobin@> wrote: > > > > --- In [email protected], Teddy Dako > > <teddydako@> wrote: > > Hi Teddy, > > > > Thanks for the reply. I have to admit I am not the tech guy but I > > believe we are using the HP drivers. I am running Windows XP Pro > > SP2. If I print a pdf drawing from Adobe reader it prints fine but > > takes forever to start printing. If I change to run from my PC it > > starts to print sooner but still takes a LONG time to plot. FYI I > am > > printing 24" x 36" construction drawings. > > > > Regards, > > > > John > > > Stepping is usually a result of printing bidirectional, that is, in > draft mode. > Check your paper settings, it should be at least coated, otherwise > the machine might switch to draft anyway. > Set the print quality higher. > If only Turbocad screws up, turbocad might be sending HP-GL/2 files > directly to the plotter, bypassing the driver, check the quality > settings on the device, and, if present, Turbocads plot settings. > ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
