> I also link it with libusb 0.1.12 and other things. If you are using hpijs only, no printer status or bi-di communication. Then with configure option --enable-hpijs-only-build, you shouldn't need libusb.
> - sometimes (never the first time after power up) the Job is > created but the construction_error = SYSTEM_ERROR. It seems > that the printer is not responding and HPIJS times out. > Retrying works and printing can continue. Not sure what this error is. If you use hpijs-only-build, then you shouldn't get this error. > - sometimes HPIJS hangs on what seems like the last pass > (bottom) of the raster. Sometimes it does not hang and > NewPage() ejects the page but the bottom of the raster is > incomplete (unfinished part of a line) This error sounds like you are closing usb io down before all the data has be received by the printer. -dave > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Martin Kajdas > Sent: Tuesday, August 28, 2007 10:15 AM > To: hplip-devel@lists.sourceforge.net > Subject: [HPLIP-Devel] Print errors and hangs using HPIJS > with HP DJ4160 > > Hello, > I am developing an embedded Linux application that uses HP > DJ4160 printer. (no desktop, no HPLIP, no CUPS, no lp, no > spooling) I am using HPIJS code from HPLIP 2.7.7 as is, which > I compile and create a static library and link with my application. > I also link it with libusb 0.1.12 and other things. > Basically, the printing works, I create a job, send some > rasters and close job. > > The problem is that: > - sometimes (never the first time after power up) the Job is > created but the construction_error = SYSTEM_ERROR. It seems > that the printer is not responding and HPIJS times out. > Retrying works and printing can continue. > - sometimes HPIJS hangs on what seems like the last pass > (bottom) of the raster. Sometimes it does not hang and > NewPage() ejects the page but the bottom of the raster is > incomplete (unfinished part of a line) > > Does anyone has any idea what to try, what to report > (additional info?), how to fix it or have seen it before? > > I think this is some kind of HPIJS driver problem that needs > to be resolved. > > > I used to have other problems (i.e. blinking panel lights) > that were fixed in this version however I was able to cause > it once with this version also but I cannot easily reproduce it. > Above problems occur regularily and I can provide debugging > info if requested. > > Thank you, > Martin > > -------------------------------------------------------------- > ----------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and > a browser. > Download your FREE copy of Splunk now >> > http://get.splunk.com/ _______________________________________________ > HPLIP-Devel mailing list > HPLIP-Devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hplip-devel > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ HPLIP-Devel mailing list HPLIP-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-devel
