Unfortunately yes, but I haven't been able to try fix it for a while,
too much things to do. BTW. I sent you some debug information did that
reveal anything more?
Aaron Albright wrote:
> Are you still having a problem with this?
>
> A
>
> Jyri Turkia wrote:
>> I have removed and re added printer several times, no luck.
Something weird is going on because hp-toolbox can see printer
correctly, can tell how much there is inc left and can request cartridge
align but it can't print.
>>
>> Aaron J Albright wrote:
>>> I'll look over the log..as well have you tried to remove/readd the
printer?
>>>
>>> A
>>>
>>> Jyri Turkia wrote:
>>>> tail -f /var/log/cups/error_log
>>>>
>>>> D [11/Jul/2006:19:08:59 +0300] LoadAllJobs: Loading attributes for
job 8...
>>>> D [11/Jul/2006:19:08:59 +0300] LoadAllJobs: Loading attributes for
job 9...
>>>> D [11/Jul/2006:19:08:59 +0300] LoadAllJobs: Loading attributes for
job 10...
>>>> D [11/Jul/2006:19:08:59 +0300] LoadAllJobs: Loading attributes for
job 11...
>>>> D [11/Jul/2006:19:08:59 +0300] LoadAllJobs: Loading attributes for
job 12...
>>>> D [11/Jul/2006:19:08:59 +0300] LoadAllJobs: Loading attributes for
job 13...
>>>> I [11/Jul/2006:19:08:59 +0300] Full reload complete.
>>>> D [11/Jul/2006:19:08:59 +0300] StartListening: NumListeners=1
>>>> D [11/Jul/2006:19:08:59 +0300] StartListening: address=00000000
port=631
>>>> D [11/Jul/2006:19:08:59 +0300] ResumeListening: setting input bits...
>>>> D [11/Jul/2006:19:09:03 +0300] AcceptClient: 4 from localhost:631.
>>>> D [11/Jul/2006:19:09:03 +0300] ReadClient: 4 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:03 +0300] ProcessIPPRequest: 4 status_code=1
>>>> D [11/Jul/2006:19:09:03 +0300] AcceptClient: 6 from localhost:631.
>>>> D [11/Jul/2006:19:09:03 +0300] ReadClient: 6 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:03 +0300] ProcessIPPRequest: 6 status_code=1
>>>> D [11/Jul/2006:19:09:03 +0300] AcceptClient: 7 from localhost:631.
>>>> D [11/Jul/2006:19:09:03 +0300] ReadClient: 7 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:03 +0300] ProcessIPPRequest: 7 status_code=1
>>>> D [11/Jul/2006:19:09:03 +0300] AcceptClient: 8 from localhost:631.
>>>> D [11/Jul/2006:19:09:03 +0300] ReadClient: 8 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:03 +0300] ProcessIPPRequest: 8 status_code=1
>>>> D [11/Jul/2006:19:09:03 +0300] ReadClient: 8 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:03 +0300] ProcessIPPRequest: 8 status_code=1
>>>> D [11/Jul/2006:19:09:04 +0300] ReadClient: 8 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:04 +0300] ProcessIPPRequest: 8 status_code=0
>>>> D [11/Jul/2006:19:09:04 +0300] AcceptClient: 9 from localhost:631.
>>>> D [11/Jul/2006:19:09:04 +0300] CloseClient: 8
>>>> D [11/Jul/2006:19:09:04 +0300] ReadClient: 9 POST
/printers/PSC1410 HTTP/1.1
>>>> D [11/Jul/2006:19:09:04 +0300] print_job: auto-typing file...
>>>> D [11/Jul/2006:19:09:04 +0300] print_job: request file type is
application/postscript.
>>>> D [11/Jul/2006:19:09:04 +0300] check_quotas: requesting-user-name
= 'root'
>>>> D [11/Jul/2006:19:09:04 +0300] print_job: requesting-user-name =
'root'
>>>> I [11/Jul/2006:19:09:04 +0300] Adding start banner page "none" to
job 14.
>>>> I [11/Jul/2006:19:09:04 +0300] Adding end banner page "none" to
job 14.
>>>> I [11/Jul/2006:19:09:04 +0300] Job 14 queued on 'PSC1410' by 'root'.
>>>> D [11/Jul/2006:19:09:04 +0300] Job 14 hold_until = 0
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob(14, 0x80050ed0)
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob() id = 14, file = 0/1
>>>> D [11/Jul/2006:19:09:04 +0300] job-sheets=none,none
>>>> D [11/Jul/2006:19:09:04 +0300] banner_page = 0
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: argv =
"PSC1410","14","root","tmphSu6yw","1","","/var/spool/cups/d00014-001"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: envp[2]="USER=root"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: envp[3]="CHARSET=utf-8"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: envp[4]="LANG=en"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[5]="PPD=/etc/cups/ppd/PSC1410.ppd"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[6]="CUPS_SERVERROOT=/etc/cups"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: envp[7]="RIP_MAX_CACHE=8m"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[8]="TMPDIR=/var/spool/cups/tmp"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[9]="CONTENT_TYPE=application/postscript"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[10]="DEVICE_URI=hp:/usb/PSC_1400_series?serial=CN548V709504BN"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: envp[11]="PRINTER=PSC1410"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[12]="CUPS_DATADIR=/usr/share/cups"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob:
envp[14]="CUPS_SERVER=localhost"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: envp[15]="IPP_PORT=631"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: statusfds = [ 8 10 ]
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: filterfds[1] = [ 11 -1 ]
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: filter =
"/usr/lib/cups/filter/pstops"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: filterfds[0] = [ 12 13 ]
>>>> D [11/Jul/2006:19:09:04 +0300]
start_process("/usr/lib/cups/filter/pstops", 0xbfc3b2a8, 0xbfc3b118, 11,
13, 10)
>>>> I [11/Jul/2006:19:09:04 +0300] Started filter
/usr/lib/cups/filter/pstops (PID 25455) for job 14.
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: filter =
"/usr/lib/cups/filter/foomatic-rip"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: filterfds[1] = [ 11 14 ]
>>>> D [11/Jul/2006:19:09:04 +0300]
start_process("/usr/lib/cups/filter/foomatic-rip", 0xbfc3b2a8,
0xbfc3b118, 12, 14, 10)
>>>> I [11/Jul/2006:19:09:04 +0300] Started filter
/usr/lib/cups/filter/foomatic-rip (PID 25456) for job 14.
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: backend =
"/usr/lib/cups/backend/hp"
>>>> D [11/Jul/2006:19:09:04 +0300] StartJob: filterfds[0] = [ -1 12 ]
>>>> D [11/Jul/2006:19:09:04 +0300]
start_process("/usr/lib/cups/backend/hp", 0xbfc3b2a8, 0xbfc3b118, 11,
12, 10)
>>>> I [11/Jul/2006:19:09:04 +0300] Started backend
/usr/lib/cups/backend/hp (PID 25457) for job 14.
>>>> D [11/Jul/2006:19:09:04 +0300] ProcessIPPRequest: 9 status_code=0
>>>> E [11/Jul/2006:19:09:04 +0300] PID 25456 stopped with status 22!
>>>> D [11/Jul/2006:19:09:04 +0300] [Job 14] Page = 595x842; 10,36 to
585,833
>>>> D [11/Jul/2006:19:09:04 +0300] [Job 14] slowcollate=0,
slowduplex=0, sloworder=0
>>>> D [11/Jul/2006:19:09:04 +0300] [Job 14] 0 %%BoundingBox: 0 0 612 792
>>>> D [11/Jul/2006:19:09:04 +0300] [Job 14] 0 %%Pages: 1
>>>> D [11/Jul/2006:19:09:04 +0300] [Job 14]
/usr/lib/cups/filter/foomatic-rip: No such file or directory
>>>> D [11/Jul/2006:19:09:04 +0300] CloseClient: 9
>>>> D [11/Jul/2006:19:09:04 +0300] AcceptClient: 9 from localhost:631.
>>>> D [11/Jul/2006:19:09:04 +0300] ReadClient: 9 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:04 +0300] ProcessIPPRequest: 9 status_code=1
>>>> D [11/Jul/2006:19:09:04 +0300] ReadClient: 9 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:04 +0300] ProcessIPPRequest: 9 status_code=1
>>>> D [11/Jul/2006:19:09:04 +0300] [Job 14] 0 %%Display HP image at
the bottom
>>>> D [11/Jul/2006:19:09:06 +0300] ReadClient: 9 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:06 +0300] ProcessIPPRequest: 9 status_code=1
>>>> D [11/Jul/2006:19:09:06 +0300] UpdateJob: job 14, file 0 is complete.
>>>> D [11/Jul/2006:19:09:06 +0300] CancelJob: id = 14
>>>> D [11/Jul/2006:19:09:06 +0300] StopJob: id = 14, force = 0
>>>> D [11/Jul/2006:19:09:06 +0300] StopJob: printer state is 3
>>>> D [11/Jul/2006:19:09:06 +0300] ReadClient: 9 POST / HTTP/1.1
>>>> D [11/Jul/2006:19:09:06 +0300] ProcessIPPRequest: 9 status_code=1
>>>> D [11/Jul/2006:19:09:14 +0300] CloseClient: 6
>>>> D [11/Jul/2006:19:09:14 +0300] CloseClient: 7
>>>>
>>>>
>>>> Aaron J Albright wrote:
>>>>> Jyri,
>>>>>
>>>>> How about if we turn on cups logging to debug mode and look at
the cups log.
>>>>>
>>>>> Edit the /etc/cups/cupsd.conf file and change loglevel to debug
(not debug2)
>>>>> save, exit, restart cups.
>>>>> then run: tail -f /var/log/cups/error_log
>>>>> try and print, post the /var/log/cups/error_log output.
>>>>>
>>>>> Thanks!
>>>>>
>>>>> A
>>>>>
>>>>> Jyri Turkia wrote:
>>>>>> Nope, Nothing changed, scanning works, hp-align works but
printing doesn't. hp-toolbox log says that printing starts and is
completed instantly but in reality printer does nothing.
>>>>>>
>>>>>> tail -f /var/log/messages says:
>>>>>>
>>>>>> Jul 11 18:58:40 armas hpiod: invalid device descriptor:1
io/hpiod/system.cpp 1341
>>>>>> Jul 11 18:58:40 armas hpiod: invalid device descriptor:1
io/hpiod/system.cpp 1341
>>>>>> Jul 11 18:58:40 armas python: hpssd[23590] error: String query
failed for id 0
>>>>>>
>>>>>>
>>>>>> Aaron Albright wrote:
>>>>>>> Jyri,
>>>>>>>
>>>>>>> Sorry I'm not completely clear...is it working okay now?
>>>>>>>
>>>>>>> Thanks!
>>>>>>>
>>>>>>> Aaron
>>>>>>>
>>>>>>> Jyri Turkia wrote:
>>>>>>>> OMG :D:D
>>>>>>>> I did't had printer on when i ran hp-check
>>>>>>>> Here is correct output:
>>>>>>>>
>>>>>>>> # hp-check
>>>>>>>>
>>>>>>>> HP Linux Imaging and Printing System (ver. 1.6.6a)
>>>>>>>> Dependency/Version Check Utility ver. 2.1
>>>>>>>>
>>>>>>>> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
>>>>>>>> This software comes with ABSOLUTELY NO WARRANTY.
>>>>>>>> This is free software, and you are welcome to distribute it
>>>>>>>> under certain conditions. See COPYING file for more details.
>>>>>>>>
>>>>>>>> Basic system info...
>>>>>>>> --> Linux armas 2.6.16.13-4-default #1 Wed May 3 04:53:23 UTC
2006 i686 athlon i386 GNU/Linux
>>>>>>>>
>>>>>>>> Currently installed version...
>>>>>>>> --> 1.6.6a
>>>>>>>>
>>>>>>>> Checking Python version...
>>>>>>>> --> Version 2.4.2 installed.
>>>>>>>> --> OK
>>>>>>>>
>>>>>>>> Checking for user interface dependencies...
>>>>>>>> Checking for SIP...
>>>>>>>> --> OK
>>>>>>>> Checking for PyQt...
>>>>>>>> --> OK
>>>>>>>> Checking Qt version...
>>>>>>>> --> Version 3.3.6 installed.
>>>>>>>> --> OK
>>>>>>>> Checking SIP version...
>>>>>>>> --> Version 4.2.1 installed
>>>>>>>> --> OK
>>>>>>>> Checking PyQt version...
>>>>>>>> --> Version 3.14.1 installed.
>>>>>>>> --> OK
>>>>>>>>
>>>>>>>> Checking for library dependencies...
>>>>>>>> Checking for libnetsnmp...
>>>>>>>> --> OK
>>>>>>>> Checking for libjpeg...
>>>>>>>> --> OK
>>>>>>>> Checking for libusb...
>>>>>>>> --> OK
>>>>>>>> Checking for libcrypto...
>>>>>>>> --> OK
>>>>>>>> Checking for libpthread...
>>>>>>>> --> OK
>>>>>>>>
>>>>>>>> Checking for application dependencies...
>>>>>>>> Checking ghostscript...
>>>>>>>> --> Version 8.15.1
>>>>>>>> Checking gcc...
>>>>>>>> --> gcc (GCC) 4.1.0 (SUSE Linux)
>>>>>>>> --> OK
>>>>>>>> Checking automake...
>>>>>>>> --> automake (GNU automake) 1.9.6
>>>>>>>> --> OK
>>>>>>>> Checking autoconf...
>>>>>>>> --> autoconf (GNU Autoconf) 2.59
>>>>>>>> --> OK
>>>>>>>> Checking make...
>>>>>>>> --> GNU Make 3.80
>>>>>>>> --> OK
>>>>>>>> Checking ReportLab (optional)...
>>>>>>>> warning: Not installed. Fax coverpage support will be disabled.
>>>>>>>>
>>>>>>>> Checking kernel module...
>>>>>>>> Checking for ppdev (optional)...
>>>>>>>> warning: Not found. Parallel printers will not work properly
with HPLIP.
>>>>>>>>
>>>>>>>> Checking for CUPS...
>>>>>>>> --> scheduler is running
>>>>>>>> --> OK
>>>>>>>>
>>>>>>>> Checking existing CUPS queues...
>>>>>>>> Printer Device URI
HPLIP Installed?
>>>>>>>> ------- ---------------------------------------------
--------------------
>>>>>>>> PSC1410 hp:/usb/PSC_1400_series?serial=CN548V709504BN
Yes
>>>>>>>>
>>>>>>>> If any errors or warnings were reported, please refer to the
installation instructions at:
>>>>>>>> http://hplip.sourceforge.net/install/index.html
>>>>>>>>
>>>>>>>> Jyri Turkia wrote:
>>>>>>>>> hp-setup runs smoothly, no errors there
>>>>>>>>>
>>>>>>>>> # hp-check
>>>>>>>>>
>>>>>>>>> HP Linux Imaging and Printing System (ver. 1.6.6a)
>>>>>>>>> Dependency/Version Check Utility ver. 2.1
>>>>>>>>>
>>>>>>>>> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
>>>>>>>>> This software comes with ABSOLUTELY NO WARRANTY.
>>>>>>>>> This is free software, and you are welcome to distribute it
>>>>>>>>> under certain conditions. See COPYING file for more details.
>>>>>>>>>
>>>>>>>>> Basic system info...
>>>>>>>>> --> Linux armas 2.6.16.13-4-default #1 Wed May 3 04:53:23 UTC
2006 i686 athlon i386 GNU/Linux
>>>>>>>>>
>>>>>>>>> Currently installed version...
>>>>>>>>> --> 1.6.6a
>>>>>>>>>
>>>>>>>>> Checking Python version...
>>>>>>>>> --> Version 2.4.2 installed.
>>>>>>>>> --> OK
>>>>>>>>>
>>>>>>>>> Checking for user interface dependencies...
>>>>>>>>> Checking for SIP...
>>>>>>>>> --> OK
>>>>>>>>> Checking for PyQt...
>>>>>>>>> --> OK
>>>>>>>>> Checking Qt version...
>>>>>>>>> --> Version 3.3.6 installed.
>>>>>>>>> --> OK
>>>>>>>>> Checking SIP version...
>>>>>>>>> --> Version 4.2.1 installed
>>>>>>>>> --> OK
>>>>>>>>> Checking PyQt version...
>>>>>>>>> --> Version 3.14.1 installed.
>>>>>>>>> --> OK
>>>>>>>>>
>>>>>>>>> Checking for library dependencies...
>>>>>>>>> Checking for libnetsnmp...
>>>>>>>>> --> OK
>>>>>>>>> Checking for libjpeg...
>>>>>>>>> --> OK
>>>>>>>>> Checking for libusb...
>>>>>>>>> --> OK
>>>>>>>>> Checking for libcrypto...
>>>>>>>>> --> OK
>>>>>>>>> Checking for libpthread...
>>>>>>>>> --> OK
>>>>>>>>>
>>>>>>>>> Checking for application dependencies...
>>>>>>>>> Checking ghostscript...
>>>>>>>>> --> Version 8.15.1
>>>>>>>>> Checking gcc...
>>>>>>>>> --> gcc (GCC) 4.1.0 (SUSE Linux)
>>>>>>>>> --> OK
>>>>>>>>> Checking automake...
>>>>>>>>> --> automake (GNU automake) 1.9.6
>>>>>>>>> --> OK
>>>>>>>>> Checking autoconf...
>>>>>>>>> --> autoconf (GNU Autoconf) 2.59
>>>>>>>>> --> OK
>>>>>>>>> Checking make...
>>>>>>>>> --> GNU Make 3.80
>>>>>>>>> --> OK
>>>>>>>>> Checking ReportLab (optional)...
>>>>>>>>> warning: Not installed. Fax coverpage support will be disabled.
>>>>>>>>>
>>>>>>>>> Checking kernel module...
>>>>>>>>> Checking for ppdev (optional)...
>>>>>>>>> warning: Not found. Parallel printers will not work properly
with HPLIP.
>>>>>>>>>
>>>>>>>>> Checking for CUPS...
>>>>>>>>> --> scheduler is running
>>>>>>>>> --> OK
>>>>>>>>>
>>>>>>>>> Checking existing CUPS queues...
>>>>>>>>> Printer Device URI
HPLIP Installed?
>>>>>>>>> -------- ---------------------------------------------
--------------------
>>>>>>>>> PSC_1400 hp:/usb/PSC_1400_series?serial=CN548V709504BN
Yes
>>>>>>>>>
>>>>>>>>> If any errors or warnings were reported, please refer to the
installation instructions at:
>>>>>>>>> http://hplip.sourceforge.net/install/index.html
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Aaron Albright wrote:
>>>>>>>>>> Jyri,
>>>>>>>>>>
>>>>>>>>>> Can you run:
>>>>>>>>>>
>>>>>>>>>> hp-check
>>>>>>>>>>
>>>>>>>>>> and post the output? Did hp-setup complete correctly?
>>>>>>>>>>
>>>>>>>>>> Aaron
>>>>>>>>>>
>>>>>>>>>> Jyri Turkia wrote:
>>>>>>>>>>> I have scanner and all other things working just fine, but
I can't print even a test page. When I print test page it is completed
instantly but in reality nothing happens. I tailed /var/log/messages and
every time I printed something got this error "hpiod: invalid device
descriptor:1 io/hpiod/system.cpp 1341" and "python: hpssd[23590] error:
Stringt query failed for id 0"
>>>>>>>>>>>
>>>>>>>>>>> I'm running suse 10.1 and HPLIP version 1.6.6a
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
-------------------------------------------------------------------------
>>>>>>>>>>> Using Tomcat but need to do more? Need to support web
services, security?
>>>>>>>>>>> Get stuff done quickly with pre-integrated technology to
make your job easier
>>>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
>>>>>>>>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>>>>>>
-------------------------------------------------------------------------
>>>>>>>>>> Using Tomcat but need to do more? Need to support web
services, security?
>>>>>>>>>> Get stuff done quickly with pre-integrated technology to
make your job easier
>>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
>>>>>>>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>>>>>> _______________________________________________
>>>>>>>>>> HPLIP-Help mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>>>>>>>>
-------------------------------------------------------------------------
>>>>>>>>> Using Tomcat but need to do more? Need to support web
services, security?
>>>>>>>>> Get stuff done quickly with pre-integrated technology to make
your job easier
>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
>>>>>>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>>>>> _______________________________________________
>>>>>>>>> HPLIP-Help mailing list
>>>>>>>>> [email protected]
>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>>>>>>>
-------------------------------------------------------------------------
>>>>>>>> Using Tomcat but need to do more? Need to support web
services, security?
>>>>>>>> Get stuff done quickly with pre-integrated technology to make
your job easier
>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
>>>>>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>>>
-------------------------------------------------------------------------
>>>>>>> Using Tomcat but need to do more? Need to support web services,
security?
>>>>>>> Get stuff done quickly with pre-integrated technology to make
your job easier
>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
>>>>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>>> _______________________________________________
>>>>>>> HPLIP-Help mailing list
>>>>>>> [email protected]
>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>>>>>
-------------------------------------------------------------------------
>>>>>> Using Tomcat but need to do more? Need to support web services,
security?
>>>>>> Get stuff done quickly with pre-integrated technology to make
your job easier
>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
>>>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>> _______________________________________________
>>>>>> HPLIP-Help mailing list
>>>>>> [email protected]
>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>>>>>
>>>>>
------------------------------------------------------------------------
>>>>>
>>>>>
>>>>>
-------------------------------------------------------------------------
>>>>> Using Tomcat but need to do more? Need to support web services,
security?
>>>>> Get stuff done quickly with pre-integrated technology to make
your job easier
>>>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
>>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>
>>>>>
>>>>>
------------------------------------------------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> HPLIP-Help mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>>>
-------------------------------------------------------------------------
>>>> Using Tomcat but need to do more? Need to support web services,
security?
>>>> Get stuff done quickly with pre-integrated technology to make your
job easier
>>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
>>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>> _______________________________________________
>>>> HPLIP-Help mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>>>
>>>
------------------------------------------------------------------------
>>>
>>>
>>>
-------------------------------------------------------------------------
>>> Using Tomcat but need to do more? Need to support web services,
security?
>>> Get stuff done quickly with pre-integrated technology to make your
job easier
>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
>>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>
>>>
>>>
------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> HPLIP-Help mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>
>>
-------------------------------------------------------------------------
>> Using Tomcat but need to do more? Need to support web services,
security?
>> Get stuff done quickly with pre-integrated technology to make your
job easier
>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your
job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> HPLIP-Help mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/hplip-help
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
