in the tar ball dir you could run: make uninstall
then remove the /usr/share/hplip directory: rm -rf /usr/share/hplipalthough you may want to try a reinstall. the hplip 1.6.7 does have all of the ppds. it's possible that your download may be corrupted or something of the like..
hope this helps! A Victor Warner wrote:
Aaron, Thank you for this. Whatever has happened, the *.ppd did not install anywhere. I might try earlier versions. Is it possible to uninstall version 1.6.7? Victor Warner On Thu, 17 Aug 2006 21:44:23 +0100, Aaron J Albright <[EMAIL PROTECTED]> wrote:hmm that's odd. here is the location: /usr/share/ppd/HP/hp_LaserJet_3020_3030.ppd.gz Victor Warner wrote:Aaron, I deleted the printer from CUPS and then ran hp-setup and am getting that the program cannot find an appropriate PPD file. Where is this located? Victor Warner hp-setup HP Linux Imaging and Printing System (ver. 1.6.7) Printer/Fax Setup Utility ver. 2.1 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Using device: hp:/usb/hp_LaserJet_3030?serial=00CNBF116166 Setting up device: hp:/usb/hp_LaserJet_3030?serial=00CNBF116166 PRINT QUEUE SETUP Using queue name: hp_LaserJet_3030 error: Unable to find an appropriate PPD file. Would you like to specify the path to the correct PPD file to use (y=yes, n=no*, q=quit) ? On Thu, 17 Aug 2006 21:26:43 +0100, Aaron J Albright <[EMAIL PROTECTED]> wrote:No problem. It looks like everything is started correctly now. I've seen this before where the make install fails at the end and doing the make clean, etc process seems to fix it. As everything looks like it's started try running hp-setup and see if it will configure the printer.You may need to delete the printer from cups as well. The; > HPLJ3030usb://HP/LaserJet%203030 from the hp-check is showing the printer is installed using the usb backend, so in theory using hp-setup should configure the printer. Let me know how that goes! Aaron Victor Warner wrote:Aaron,Thank you for reply and suggestions. I ran make clean, then ./configure--prefix=/usr --disable-network-build then make, make install as suggested. make install produces the same errors as my initial post. Below is the output of make clean and ./configure --prefix=/usr --disable-network-build but not make and make install as they are too long and scrolled out off the Konsole window. I also ran again /etc/init.d/hplip restart and hp-check. On this occasion there were nofailures for /etc/init.d/hplip restart. The output for both of these arealso produced below. I am very grateful for your help. Victor WarnerDellDeskTop:/home/victor/various/hplip-1.6.7# /etc/init.d/hplip restartStopping hpiod: [ OK ] Stopping hpssd: [ OK ] Starting hpiod: [ OK ] Starting hpssd: [ OK ] DellDeskTop:/home/victor/various/hplip-1.6.7# HP-Check HP Linux Imaging and Printing System (ver. 1.6.7) Dependency/Version Check Utility ver. 2.1 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Basic system info... --> Linux DellDeskTop 2.6.10 #1 Fri Jul 8 14:33:24 PDT 2005 i686 GNU/Linux Currently installed version... --> 1.6.7 Checking Python version... --> Version 2.3.4 installed. --> OK Checking for user interface dependencies... Checking for SIP... --> OK Checking for PyQt... --> OK Checking Qt version... --> Version 3.3.3 installed. --> OK Checking SIP version...error: Unable to import pyqtconfig. PyQt may not be properly installed.Checking PyQt version... --> Version 3.13.0 installed.error: HPLIP may not function properly with the version of PyQt that isinstalled (3.13.0). error: Incorrect version of PyQt installed. Ver. 3.14 or greater required. Checking for library dependencies... Checking for libnetsnmp... --> OK Checking for libjpeg... --> OK Checking for libusb... --> OK Checking for libcrypto... --> OK Checking for libpthread... --> OK Checking for application dependencies... Checking ghostscript... --> Version 7.07.1 Checking gcc... --> gcc (GCC) 3.3.5 (Debian 1:3.3.5-3) --> OK Checking make... --> GNU Make 3.80 --> OK Checking ReportLab (optional)... warning: Not installed. Fax coverpage support will be disabled. Checking kernel module... Checking for ppdev (optional)...warning: Not found. Parallel printers will not work properly with HPLIP.Checking for CUPS... --> scheduler is running --> OK Checking existing CUPS queues... Printer Device URI HPLIP Installed? -------- ------------------------ -------------------- HPLJ3030 usb://HP/LaserJet%203030 NoNote: Any CUPS queues that are not 'HPLIP Installed', must be installedwith the 'hp:' or 'hpfax:' backends to have them work in HPLIP. Refer to the install instructions on http://hplip.sourceforge.net for more help. If any errors or warnings were reported, please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html make clean: [EMAIL PROTECTED]:~/various/hplip-1.6.7$ make clean Making clean in prnt/hpijs make[1]: Entering directory `/home/victor/various/hplip-1.6.7/prnt/hpijs' rm -f hpijs hpijs rm -rf .libs _libs rm -f hppgsz hppgsz rm -f *.o rm -f *.lomake[1]: Leaving directory `/home/victor/various/hplip-1.6.7/prnt/hpijs'Making clean in . make[1]: Entering directory `/home/victor/various/hplip-1.6.7' rm -f hp hp test -z "libhpip.la libsane-hpaio.la" || rm -f libhpip.la libsane-hpaio.la rm -f "./so_locations" rm -f "./so_locations" rm -rf .libs _libs test -z "libhplip-api.la" || rm -f libhplip-api.la rm -f "./so_locations" rm -f ptest ptest rm -f hpiod hpiod rm -f *.o rm -f *.lo make[1]: Leaving directory `/home/victor/various/hplip-1.6.7' [EMAIL PROTECTED]:~/various/hplip-1.6.7$ [EMAIL PROTECTED]:~/various/hplip-1.6.7$ ./configure --prefix=/usr --disable-network-build checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for epcf90... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for gfortran... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ANSI C... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking for a Python interpreter with version >= 2.2... python checking for python... /usr/bin/python checking for python version... 2.3 checking for python platform... linux2 checking for python script directory... ${prefix}/lib/python2.3/site-packages checking for python extension module directory... ${exec_prefix}/lib/python2.3/site-packages checking for chkconfig... no checking for install_initd... no checking for pthread_create in -lpthread... yes checking for CRYPTO_free in -lcrypto... no checking for snmp_timeout in -lnetsnmp... no checking for usb_init in -lusb... yes checking for ANSI C header files... (cached) yes checking cups/cups.h usability... yes checking cups/cups.h presence... yes checking for cups/cups.h... yes checking net-snmp/net-snmp-config.h usability... no checking net-snmp/net-snmp-config.h presence... no checking for net-snmp/net-snmp-config.h... no checking for an ANSI C-conforming const... yes checking whether byte ordering is bigendian... no checking for rpm install... no checking for network build... no checking for parallel port build... yes checking for fax build... yes checking "for cups ppd path"... "using /usr/share/cups" checking "for cups backend path"... "using /usr/lib/cups/backend" checking "for icon directory"... "using /usr/lib/menu/hplip" configure: creating ./config.status config.status: creating Makefile config.status: executing depfiles commands configure: configuring in prnt/hpijsconfigure: running /bin/sh './configure' --prefix=/usr '--prefix=/usr''--disable-network-build' --enable-hplip-build --cache-file=/dev/null --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for epcf90... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for gfortran... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ANSI C... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking for main in -lm... yes checking for jpeg_set_defaults in -ljpeg... yes checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking jpeglib.h usability... yes checking jpeglib.h presence... yes checking for jpeglib.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether byte ordering is bigendian... no checking for uint32_t... yes checking "for platform-dependencies"... "using Default platform.h" checking "for cups ppd path"... "using /usr/share/cups/model" checking "for cups filter path"... "using /usr/lib/cups/filter" checking "for cups install"... yes checking "for foomatic install"... yes checking "for hplip build"... yes checking for working memcmp... yes checking for strtod... yes checking for strtol... yes checking for pow... yes configure: creating ./config.status config.status: creating Makefile config.status: executing depfiles commands [EMAIL PROTECTED]:~/various/hplip-1.6.7$ On Thu, 17 Aug 2006 19:14:25 +0100, Aaron J Albright <[EMAIL PROTECTED]> wrote:Hey Victor.The pyqt shouldn't cause a problem during the make install. Could youdo make clean, then ./configure --prefix=/usr then make, make install again and post pass me the output of all of it? Thanks! Aaron Victor Warner wrote:Thank you for the reply. Running /etc/init.d/hplip restart produces: Stopping hpiod: /etc/init.d/hplip: line 57: kill: (5423) - No such process [FAILED] Stopping hpssd: /etc/init.d/hplip: line 57: kill: (5799) - No such process [FAILED] Starting hpiod: [ OK ] Starting hpssd: [ OK ] Running hp-check produces one significant error: that PyQt is at version3.13 not 3.14. Would that account for the errors in make install? Thefull output for hp-check is below. Victor Warner DellDeskTop:/home/victor/various/hplip-1.6.7# hp-check HP Linux Imaging and Printing System (ver. 1.6.7) Dependency/Version Check Utility ver. 2.1 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Basic system info... --> Linux DellDeskTop 2.6.10 #1 Fri Jul 8 14:33:24 PDT 2005 i686 GNU/Linux Currently installed version... --> 1.6.7 Checking Python version... --> Version 2.3.4 installed. --> OK Checking for user interface dependencies... Checking for SIP... --> OK Checking for PyQt... --> OK Checking Qt version... --> Version 3.3.3 installed. --> OK Checking SIP version... error: Unable to import pyqtconfig. PyQt may not be properly installed. Checking PyQt version... --> Version 3.13.0 installed. error: HPLIP may not function properly with the version of PyQt that is installed (3.13.0). error: Incorrect version of PyQt installed. Ver. 3.14 or greater required. Checking for library dependencies... Checking for libnetsnmp... --> OK Checking for libjpeg... --> OK Checking for libusb... --> OK Checking for libcrypto... --> OK Checking for libpthread... --> OK Checking for application dependencies... Checking ghostscript... --> Version 7.07.1 Checking gcc... --> gcc (GCC) 3.3.5 (Debian 1:3.3.5-3) --> OK Checking make... --> GNU Make 3.80 --> OK Checking ReportLab (optional)... warning: Not installed. Fax coverpage support will be disabled. Checking kernel module... Checking for ppdev (optional)... warning: Not found. Parallel printers will not work properly with HPLIP. Checking for CUPS... --> scheduler is running --> OK Checking existing CUPS queues... Printer Device URI HPLIP Installed? -------- ------------------------ -------------------- HPLJ3030 usb://HP/LaserJet%203030 No Note: Any CUPS queues that are not 'HPLIP Installed', must be installedwith the 'hp:' or 'hpfax:' backends to have them work in HPLIP. Referto the install instructions on http://hplip.sourceforge.net for more help. If any errors or warnings were reported, please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html On Thu, 17 Aug 2006 17:49:40 +0100, Aaron J Albright <[EMAIL PROTECTED]> wrote:Can you run /etc/init.d/hplip restart what happens? also please run hp-check and post the output. Thanks! Aaron Victor Warner wrote:I am compiling from source version 1.67 of HPLIP (under Linspire 3.0.347 linux). I can successfully run configure (./configure --disable-network-build) and make. But on running make install (as root) I get the following errors: /bin/sh: hplip: command not found make[3]: *** [install-data-hook] Error 127 make[3]: Leaving directory `/home/victor/various/hplip-1.6.7' make[2]: *** [install-data-am] Error 2 make[2]: Leaving directory `/home/victor/various/hplip-1.6.7' make[1]: *** [install-am] Error 2 make[1]: Leaving directory `/home/victor/various/hplip-1.6.7' make: *** [install-recursive] Error 1 DellDeskTop:/home/victor/various/hplip-1.6.7# I would be grateful for help in solving this problem. Victor Warner ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
smime.p7s
Description: S/MIME Cryptographic Signature
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
